Automotive Technology
Shop by ASE Category
Showing 85–96 of 109 results
-
ELECTUDE Courseware for Speed and Position Sensors Trainer
The perfect eLearning complement to ConsuLab’s Speed and Position Sensors Trainer, ELECTUDE’s courseware consists of 8 student-led practical assignments and over 9.5 hours of instruction.
Learners develop diagnostic skills using this blended e-learning and mechanical training aid package. The combination of Electude’s e-learning modules with ConsuLab’s tabletop sensors training system creates a dynamic, hands-on environment for every level of learner. The package covers some of the most common analog and digital sensors, including hall effect and magneto resistance.
With this practical set-up, the participant can supplement previously acquired knowledge of sensors with practical skills. The practical set-up contains four sensors for determining speed and position; inductive, Hall, MRE with internal and MRE with external magnet.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Fuel Injection and Engine Management Trainer
The perfect eLearning complement to ConsuLab’s Fuel Injection and Engine Managment Trainer, ELECTUDE’s courseware consists of 18 student-led practical assignments and over 19 hours of instruction.
The EM-330-1 Fuel Injection and Engine Management Trainer consists of a practical setup and the associated eLearning. With this practical setup, the participant can supplement previously acquired knowledge about the engine management system with practical skills.
Teach the working principles of a fully function Engine Management system but within the advantages of a safe and cost effective learning environment. Due to the presence of control buttons, sensor values can be changed, and the Engine Management system will respond to this with the control of its actuators. This allows the functioning of the system (cause and effect) to be experienced and understood by students. Because the Trainer has a Break-out box with measurement connections and an OBD-plug, students can perform measurements on the system using a multimeter, oscilloscope or diagnostic tester.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Automotive Lighting Trainer
The perfect eLearning complement to ConsuLab’s Automotive Lighting System Trainer, ELECTUDE’s courseware consists of 24 student-led practical assignments and over 25.5 hours of instruction.
Teach the working principles of vehicle lighting systems. This practical setup consists of three panels representing the front, back and side lighting of a vehicle. They are operated by the center control panel consisting of switches, fuses, relays and more. Student will learn to read wiring diagrams, connect and test (sub)systems. Student will also learn to troubleshoot system defects by the use of an 12x faultbox and step-by-step guidance. This set-up is perfect to train students in their basic electrical- and diagnosis skills.
The Automotive lighting system Trainer consists of a practical setup and the associated E-learning. The practical setup consists of three panels with all components that represent the lighting system of a vehicle. The components are connected to each other using the corresponding wiring set. In addition, the set-up is extremely suitable for teaching diagnostic work. Through guided troubleshooting and 12 work orders (incl. Complaint description) practical situations are simulated in which the participant can practice in a safe learning environment.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for CAN Bus Multiplex Trainer
The perfect eLearning complement to ConsuLab’s CAN bus Multiplex Training System, ELECTUDE’s courseware consists of 15 student-led practical assignments and over 17 hours of instruction.
Teach the working principles of CAN-bus and network communication in an engaging eLearning environment complemented with physical hands-on training system from ConsuLab. Teaching concepts and skills around CAN bus technology has never been more fun, exciting, and accessible with Toolkit’s ELECTUDE + ConsuLab offering.
This practical set-up consists of four control units, switches, sensors and a lighting system, representing a fully operational CAN- bus network that communicate via the J-1939 protocol. Both analog and digital signals can be measured with a multimeter or oscilloscope. In addition, sensor values can be made visible through an information display. The Trainer is also equipped with 12x faultbox. This set-up is ideal for teaching the principles of CAN-bus networks, CAN-bus communication, CAN-bus diagnostics and CAN-bus lighting systems.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Ignition System Trainer
The perfect eLearning complement to ConsuLab’s Coil-on-Plug Ignition System Trainer, ELECTUDE’s courseware consists of 1 student-led practical assignments and over 9 hours of instruction.
Using the tabletop EM-200-14 Coil-on-Plug Ignition System Training Aid from ConsuLab and ELECTUDE eLearning, students can clearly visualize the ignition system and complete hands-on activities designed to reinforce lesson modules. Four operational faults can be inserted with terminal block receptacles as diagnostic test points. The training aid also includes:
- Engine Control Module (ECM)
- Crankshaft Position Sensor
- Camshaft Position Sensor
- Electric motor-driven crankshaft and/or crankshaft sprockets
- OBD II data link connectors
- Wiring diagrams in both the courseware and the training aid
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for EVAP System Trainer
The perfect eLearning complement to ConsuLab’s EVAP (Evaporative Emissions) Trainer, ELECTUDE’s courseware consists of 9 student-led practical assignments and over 9.5 hours of instruction.
The ELECTUDE EM-200-22EVAP system courseware consists of a practical set-up and the associated E-learning. This practical set-up allows the participant to supplement previously acquired knowledge of the sensors with practical skills.
Teach the basics of the EVAP with this combination of ELECTUDE modules and ConsuLab’s desktop EVAP training aid. E-learning modules teach the purpose of emissions systems, explain leak tests and demonstrate how to identify and test valves and sensors. The training aid reinforces these concepts with functional fuel tanks, valves, sensors, controls, and DVOM test points.
Check Out the FREE Demo Under “Software Package”
-
Textbook: Electric and Hybrid Vehicles – 2nd Edition
Electric and hybrid vehicles are now the present, not the future. This straightforward and highly illustrated full color textbook is endorsed by the Institute of the Motor Industry and introduces the subject for further education and undergraduate students as well as technicians.
A perfect complement to the Switch Electric Vehicle Kit, this textbook is considered a gold-standard for Electric Vehicle Training. Electric and Hybrid Vehicles by Tom Denton covers the different types of electric vehicle, costs and emissions, and the charging infrastructure, before moving on to explain how hybrid and electric vehicles work.
-
Textbook: Build Your Own Electric Vehicle
Thoroughly revised and expanded, Build Your Own Electric Vehicle, Third Edition, is your go-to guide for converting an internal combustion engine vehicle to electric or building an EV from the ground up. Students will learn all about the wide variety of EVs available for purchase and how they’re being built.
BUILD, CONVERT, OR BUY A STATE-OF-THE-ART ELECTRIC VEHICLE
Students will learn all the latest breakthroughs, including AC propulsion and regenerative braking systems, intelligent controllers, batteries, and charging technologies.
A perfect complement to the Switch Electric Vehicle Kit, this textbook is considered a gold-standard for Electric Vehicle Training.
-
FPTI Hydraulics Training System MF-102-H
Upgrade your hydraulics training with the Fluid Power Training Institute’s MF-102-H Hydraulic Training System by Toolkit Technologies. This USA-made, industrial-grade system delivers over 40 hours of hands-on learning in hydraulics, safety, schematics, and advanced concepts. Perfect for technical classrooms, it features robust components, flexible configurations, and optional modules to expand capabilities. With expertly designed educational materials and real-world applications, the MF-102-H is the ultimate solution for teaching foundational and advanced hydraulics. Discover unmatched quality and performance with this industry-leading training system today!
The hydraulics trainer comes in either single- or double-sided configurations and comes complete with instructional materials for teaching industrial hydraulics.
-
FPTI Hydraulics Training System with Troubleshooting MF-102-H-TSE
Our Fluid Power Training Institute FPTI MF-102-H-TSE Hydraulic Training System with Troubleshooting and Electronic Fault Insertion takes hydraulics training to a whole new level.
This USA-made, industrial-grade system delivers over 40 hours of hands-on learning in hydraulics, safety, schematics, and advanced concepts. Perfect for technical classrooms, it features robust components, flexible configurations, and optional modules to expand capabilities. With expertly designed educational materials and real-world applications, the MF-102-H-TSE is the ultimate solution for teaching foundational and advanced hydraulics as well as troubleshooting. Discover unmatched quality and performance with this industry-leading training system today!
The MF-102-H-TSE includes Electronic auto-fault insertion through a built-in PC panel with 22” touch-screen makes, which makes it possible for almost every component on the hydraulics training system to automatically “wear out.” The MF-102-H-TSE hydraulics training system with troubleshooting emulates real-world wear patterns in hydraulic components for students to gain real-world skills.
The hydraulics trainer comes in either single- or double-sided configurations and comes complete with instructional materials for teaching industrial hydraulics.
-
MF102 Hydraulics Trainer + Troubleshooting
We are proud to bring this incredible hydraulics training system to schools whereby students can get invaluable hands-on training in the fundamentals of Hydraulics, Hydraulics Safety, Advanced Hydraulics, and now the added training benefit of Troubleshooting capabilities.
The MF102-H-TS includes 40-hours of possible training on the base model PLUS an additional 40-hours of training in troubleshooting possible. Unparalleled in terms of craftsmanship and curriculum, this trainer is proudly designed and built in the USA.
Available Single-Sided or Double-Sided
-
MF102 Hydraulics Trainer with Troubleshooting and Touchscreen
The best hydraulics training system on the market keeps getting better! Fluid Power Training Institute’s MF102-H-TSE Hydraulics Training System with Troubleshooting now includes a built-in Touchscreen Monitor and PC for practical lab activities, troubleshooting, and student tracking!
Students get in-depth, hands-on training in the fundamentals of hydraulics, advanced hydraulics, troubleshooting, safety, and more with over 40 hours of curriculum in the base system, additional 40 hours in troubleshooting, and more with additional options.
With the built-in monitor, instructors can automatically track student activity to determine whether they truly understand how to effectively diagnose hydraulics problems or are just “replacing parts” at random!
Available in single-sided or double-sided systems.
