Automotive Technology
Shop by ASE Category
Showing 49–60 of 105 results
-
Engine Mechanical Diagnostics Trainer
The ConsuLab EM-141S-TY01 Automotive Training Aid is a working engine trainer for teaching engine mechanical diagnosis on a Toyota Corolla platform. The EM-141S-TY01 Mechanical Diagnosis Engine trainer was designed for the purposes of teaching students mechanical engine component failure diagnosis, and is a real time-saver allowing instructors to instantly provide a “turn-key” engine mechanical fault diagnosis package.
Have you ever wanted a running engine with repeatable mechanical faults that all of your students could diagnose? Would you like an engine system that has internal mechanical faults not requiring you to reinsert and repair them after each student use? Our EM-141S-TY01 does exactly that, and makes teaching automotive technicians easier.
The working engine bench is made to order and comes with complete curriculum and student activity manuals.
-
Cutaway Variable Geometry Turbocharger
Explore the Cutaway of a variable geometry turbocharger based on a Toyota platform.
-
Functional Cutaway Diesel Starter
The ConsuLab EC-510HV Functional Cutaway Diesel Starter demonstrates the internal operation of a heavy duty diesel starter and permits the student to visualize and safely operate the system.
-
Diesel Engine Repair Trainer 2-Cylinder Mechanical Injection
The ConsuLab HV-145S Diesel Repair Trainer (2-cyl mechanical injection) is a complete running diesel engine for your classroom. A teardown station for teaching engine mechanical, with low-cost consumables, small package size and brand-new components. Teach the fundamentals of diesel engines, mechanical fuel injection systems, injectors, pumps, component identification all on this Kubota 2-cylinder engine from ConsuLab.
- Engine may be run prior to disassembly and after reassembly.
- Functional fuel control lever.
- Bell housing plate allows access to crank pulley bolts and rear main oil seal
- Robust connectors between the starting station and swivel for all connection points.
- Flat-faced leak-less fuel line connections between the two units.
-
Cutaway Eaton Transmission Trainer
The EC-1108 cutaway Eaton transmission has been designed for teaching Eaton heavy-duty transmission theory and operation. This model provides several forward speeds and reverses, consisting of a front section and an auxiliary section.
The auxiliary section contains LO and HI range ratios, and the L and H splitter gear ratios. When in HI range, the gear ratios can be split by using the splitter control button. This model is driven by hand crank.
-
Cutaway Allison Transmission – 3000 SERIES
The ConsuLab EC-1106-03 cutaway Allison transmission has been specifically designed for teaching heavy duty automatic transmission theory and operation. It has been strategically sectioned and cutaway to allow students to visualize the internal transmission functions.
The Allison 3000 series is a fully automatic torque converter driven, electronically controlled 6-speed automatic transmission that is commonly used in coaches and heavy vehicles.
The other Allison Series are available on request.
-
Cutaway Allison Transmission – 1000 SERIES
The ConsuLab EC-1106-01 cutaway Allison transmission has been specifically designed for teaching heavy duty automatic transmission theory and operation. It has been strategically sectioned and cutaway to allow students to visualize the internal transmission functions. The Allison 1000 series is a fully automatic torque converter driven, electronically controlled 5-speed automatic transmission that is commonly used in trucks and light vehicles.
-
Cutaway 4×4 Drive Train with Manual Transmission *Discontinued
The ConsuLab EC-1103M cutaway trainer demonstrates the internal operation of a 4X4 drive train with manual transmission and allows visualization of gear changes, clutch function, transfer case power flow, differential function and limited slip differential function (clutch type).
*Discontinued 2023
-
Cutaway Open Adjustable Differential Trainer
As an instructor, have you struggled to demonstrate how a differential system works to your students? The EC-431 is a working system of actual components so students can visualize the mechanical operation of an open differential and make your life easier as an instructor. The EC-431 provides an easy method of demonstrating differential operation and also the common adjustments made during common service procedures.
-
GM Cobalt or Pontiac G5 2.2L Ecotec Engine Trainer with HVAC
The ConsuLab EM-140 engine performance trainer with HVAC is a fully operational engine mounted on a mobile stand. Trainer is based on 2009-2010 and newer GM ECOTEC 2.2L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” tubular steel equipped with four 5” phenol casters (2-fixed and 2-swivel w/locks). Students can perform many ASE Education Foundation related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
GM Duramax Diesel Trucks Engine Bench 6.6L
The diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2011 GM Trucks (Chevrolet Silverado or GMC Sierra) w/Duramax 6.6L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
F-Series Ford Diesel Truck Engine Bench
The EM-140D diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2011 Ford Pickup F Series w/ POWERSTROKE 6.7L, 8-cylinder diesel engine platform. Trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
