Manufacturing

Read More...

Showing 25–36 of 73 results

  • Part Feeding and Detecting Training System – MAP-201

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-201: Body Supply Part Feeder + Detector/Ejector

    The process: A gravity feeder houses the parts in a column. Each part has a non-symmetrical interior housing and is ejected by a pneumatic cylinder. The correct orientation of the part is verified using a cylinder with a plunger. After verification, an oval section pneumatic cylinder moves the work-piece to the final position. Otherwise, a single acting cylinder removes the part via the evacuation ramp.

  • Vacuum-Held Material Handling Training System – MAP-202

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-202: Vacuum-Held Handling Device with Two Shafts

    MAP-202: The function of this handling device is to transfer the part from a starting area to a final unloading area, using three vacuum pads. This is a cartesian handling device with two shafts which moves a part from one position to another, holding it with a set of three vacuum pads.

  • Vertical Revolving Material Handling Training System – MAP-203

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-203: Vertical Revolving Handling Training System with Internal Gripper

    The function of this material handling device is to transfer the part from a starting area to an unloading area, using an internal gripper. The part used in this process is a bearing so that when it is placed on the unloading area, it fits perfectly onto a stainless steel pivot with a slightly smaller diameter than the bearing’s inner diameter.

  • Horizontal Rotolinear Material Handling Training System – MAP-204

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-204: Vertical Revolving Handling Training System with Internal Gripper

    The function of the handling device is to transfer the part from a starting area to an unloading area through a rotolinear actuator that displaces an outer gripper. The part being transported is a metal bearing.

    The part used is made from anodized aluminum, 14.6mm diameter and 41mm height, so that when the part is placed on the unloading area it fits perfectly onto a stainless steel pivot with a slightly larger diameter than the shaft.

  • Mini-Cell Material Handling Assembly MAP-205

    The MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    The MAP-205 combines the MAP-201, MAP-202, MAP-203, and MAP-204 into a single integrated mini-cell assembly.

    The MAP-205 assembles and disassembles a product (metal turning mechanism) via 4 handling devices working together on a single tabletop frame.

    1. Feeding the base
    2. Assembling the bearing
    3. Inserting the shaft
    4. Placing the lid
  • Modular Assembly System MAS-200

    Build upon your mechatronics and automation studies with the MAS-200 Modular Assembly System from industry-leaders at SMC.

    This hands-on training system emulates a real industrial assembly process, incorporating the major technologies required by today’s automated industry into one, compact system.

    The complete system consists of five stations that work both independently and in unison to assemble a complete product with a metal base, bearing, shaft and lid.  The fifth station is located between the others and is responsible for transferring and assembling the parts; which can be done via a pneumatic assembly or robotic assembly.

    The modular design of the equipment allows a vast range of options since the stations are completely autonomous, but can be assembled to form a complete manufacturing cell.

    MAS-201: Base Feeding Station

    MAS-202: Bearing Insertion Station

    MAS-203: Shaft Insertion Station

    MAS-204: Lid Positioning Station

    MAS-205: Transfer and Assembly Station – Robotic or Pneumatic

  • Servo (Drives) Motion Training System

    The Servo Motion Training System provides participants with hardware allowing for hands-on experiments in setup,

    configuration and programming and servo drives for rotary or linear motion. The system gives access to onboard input and

    output devices in addition to providing connectivity for external devices.

    The system can be purchased with a Motion-Capable PLC or utilized in combination with an existing motion-capable PLC.

    Tabletop or Suitcase Form Factor

    • 120Vac Power Entry
    • Emergency Stop
    • (3) Selector Switches (Enable, + Over-Travel, – Over-Travel)
    • (2) Homing Sensors
    • (2) Servo Rotary Axis
    • (2) Servo Drives
  • 4-Station Flexible Manufacturing System i4o

    The best just got better with this incredible training from SMC! The FMS-200 Special Edition Industry 4.0 takes the most popular industrial advanced mechatronics training system on the market and combines it with advanced Industry 4.0 technologies for real-world, skills-driven training for industry.

    The 4-Station Configuration brings classrooms a compact and expandable solution for hands-on Industry 4.0 training with built-in troubleshooting.

    Students will get industry-relevant hands-on training around the crucial skills demanded by manufacturing and industry. Industrial manufacturing skills student expect to receive include automation processes, safety, PLC programming, Distributed IO, smart devices, artificial vision, and more!

  • SMC Vacuum Technology Training System

    SMC, the worldwide leading manufacturer of Pneumatic Components and Technologies, has developed a training system specifically for hands-on skills development in Vacuum Technology. Featuring the most commonly found vacuum technologies found in industrial companies like Intel, Dell, Apple, Samsung, Toyota, and more, the VAC-400 is the training system needed for skills development training in vacuum technologies.

  • SMC Automated Process Control Training System

    The IPC-200 is SMC’s unique training solution specific to automation and process control. Commonly used for training in the food & beverage production and processing industries as well as pharmaceutical industry, the IPC-200 brings real-world industrial skills and technologies to students’ fingertips with an exciting and project-based tabletop training system.

    A fully modular and flexible automate process control system, the IPC-200 is comprised of three modules which can work individually or as a complete process line. Various configurations can be created to adapt the IPC-200 equipment to our users different requirements and budgets.

    IPC-200 emulates a liquid production and bottling plant and includes the technologies used in a continuous process industry, such as pneumatics, electric motors, sensors, continuous processes, programmable controllers, industrial communications, etc.

    It is built entirely from industrial materials so that student works with the same elements found in the working environment.

     

  • Pneumatic Troubleshooting Training System

    Take your Pneumatics training to the next level with our new, hands-on Pneumatic Troubleshooting Training System.

    The PNEU-TS-201 Training system provides participants with hardware allowing for hands-on activities in troubleshooting of industrial pneumatic applications. This system gives access to various electrical and pneumatic components which are connected to create six unique applications. The operator control section allows for direct manual and automatic control of each application. Lastly the system includes fault insertion capability to assist in development of a systematic approach to troubleshooting.

    The Pneumatic Troubleshooting Training System is the most capable and comprehensive pneumatics training aid of its kind. Complete with Pick & Place, Loading Actuator, Rotary Manipulator, Free Wheeling Motor/Brake, Air Over Oil, and Operator Control Station.

  • PLC Automation Training System | all-in-one

    The ATS-200 Automation Training System provides students with a hardware platform for performing hands-on skills development activities for automation technologies operations. The tabletop or mobile platform includes various applications which can be quickly connected to provide advanced activities, expanding the learning objectives beyond simple on/off functionality.

    The all-in-one PLC Training System includes:

    ◉ Operator Control Application

    ◉ Sensors and Switches Application

    ◉ Pneumatic Actuator/Valve Application

    ◉ Linear Ball Screw Application

    ◉ BCD Thumbwheel and 7 Segment Display

    ◉ Dual Analog Potentiometer and Meters

    ◉ Motor Control Application

    ◉ Variable Speed Drive (Any Brand)

    ◉ PLC (Any Brand)

    ◉ HMI (Any Brand)

    ◉ PID Pressure Application

    ◉ PID Temperature Application

    The system shown as tabletop trainer with banana jack connections. The unit can be purchased with a mobile frame with all components pre-wired to the PLC requiring no additional connections.