A6 - Electrical/Electronic Systems
Showing 1–12 of 25 results
-
Tesla Electric Vehicle Training System
We are proud to release premier Electric Vehicle Training System available on the market today, the ConsuLab EV-601 iDEV Tesla Training Car. Featuring a functional Tesla Model 3 with OEM components and technologies.
Have you ever wondered how to give your students hands-on exploration of a complete electrical vehicle in a safe environment? The EV-601-TS_053322 ALL EV iDEV training car by ConsuLab is not just a training aid, it’s an actual Tesla Model 3 training car visually displayed for maximum learning! All major components are identified in their actual location, most have been exposed (cutaway) in a way that is not possible on an operating vehicle, this helps attain a better understanding of their internal components and workings.
Complete with practical training activities and curriculum!
-
Connector and Harness Training System
CONNECTOR TRAINER – CIRCUIT AND SIGNAL ACQUISITION
ConsuLab has created an intuitive student-led learning system for Automotive Technology students to practice proper non-destructive back-probing of connectors and components while measuring voltages, resistances, and waveform signals using both oscilloscopes and digital multimeters.
The tabletop format makes it easy to use and accessible for students to learn in an intuitive way, but store and transport easily when not in use.
The CL-1930 Connector and Harness trainer includes a simulated ECU, multiple sensors and connectors, and a power supply. Student competency can be measured through instructor-controlled fault scenarios that students then diagnose.
This interactive product provides an exciting learning experience for students to practice and perfect their skills. All connectors, terminals and components are field serviceable.
-
ADAS (Advanced Driver Assist Systems) Trainer
With the ADAS Trainer, you’ll be teaching the most advanced concepts in vehicle safety and automation. As the automotive industry has evolved, the role of sensors in today’s vehicles has become more important. Unfortunately, these systems can be challenging to understand without hands-on experience, which is why the ADAS Trainer is essential.
This training system breaks down the elements of advanced driver assist systems and autonomous vehicle concepts, providing a clear and concise look at the technologies involved. Thanks to our advanced simulations, students will be able to visualize the data collected by each sensor, as well as where they are located in a vehicle. Then, they’ll be able to analyze that data to understand how each sensor contributes to overall vehicle operation.
The ADAS Trainer is the most comprehensive tool available for teaching the next generation of automotive professionals about autonomous and ADAS systems. Equip your students with the tools they need to stay ahead of the curve with the ADAS Trainer.
-
EV High Voltage Safety and Disconnect Trainer
We are proud to announce our newest training system for Automotive and Electric Vehicle classrooms, the EV-400 High Voltage Safety and Disconnect Trainer from ConsuLab.
Combining fundamental and foundational skills in electrical concepts with EV-specific training content in high voltage circuits and first-responder loops, the EV-400 is a must-have training tool for modern automotive classrooms.
Available in single training systems or as classroom packages of 12 training systems.
-
Ohm’s Law & DC Circuits Trainer
The CL-1919-05 Ohm’s Law & DC Circuits trainer is a self-contained educational learning system designed to assist instructors in teaching students basic electrical and electronic theory. It is designed to help teach Ohm’s Law basics as well as demonstrating common electrical system components and circuit operation. A student project manual provides circuit construction and learning assignments designed to help students learn. The trainer is protected with a removable metal cover. The case features a carrying handle and has internal storage for jumper test leads and power cord.
-
Speed & Positions Sensors Trainer
The EM-200-25 Speed and Position Sensors trainer is used to demonstrate the operation, diagnosis and testing of common types of analog and digital speed and position sensors as they operate on a real vehicle all in one convenient place.
The trainer provides a safe and effective method of demonstrating the operating principles of different types of speed and position sensors that are common on today’s cars and trucks normally used for wheel speed, engine speed and vehicle speed.
All sensors are mounted on a common shaft which is driven by a variable speed electric motor to create different operating conditions. Comes with complete curriculum and courseware! -
Electromagnetism Trainer
The ConsuLab CL-1902 Electromagnetism trainer is designed for your students to physically demonstrate, test, measure, and experience electromagnetism using a “hands-on” approach to learning. Many aspects of a modern vehicle, whether a car, truck, combustion powered, hybrid or electrically driven, depend on some form of electromagnetism.
-
Automotive Lighting System Trainer
The ConsuLab CL-1918 Automotive Lighting System Trainer has been developed to teach modern automotive lighting systems through student led learning exercises where students develop their understanding of the system through the physical wiring all circuits.
The learning exercises are developed at two levels to allow both entry level and advanced level students to expand their skills.
The product is used for teaching Ohm’s Law, basic circuits, advanced circuits, relay controlled, power side and ground side-controlled circuits, and there is an included fault box on each side with 12 real world faults that include open circuits, short circuits, high resistance circuits that will require voltage drop testing to verify, ground faulted circuits and more.
Available in both single or double-sided form factors. Can be used in combination with the ConsuLab CAN BUS Trainer.
-
CAN Bus Multiplex Trainer
The ConsuLab MP-1918 is a CAN Bus Multiplex trainer that communicates in J-1939 protocol. Digital and analog inputs and outputs can be activated. Analog signals can be displayed using the J-1939 display. The trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. This unit is equipped with an integrated electronic fault box containing 12 faults.
The training aid includes a complete curriculum to make teaching CAN Bus as easy as possible.
The CAN Bus training system can be single-sided (-1S), double-sided (-1D), or used in combination with the ConsuLab Automotive Lighting System trainer.
-
CAN Bus Multiplex Trainer
The ConsuLab MP-1918-1D is a CAN Bus Multiplex trainer that communicates in J-1939 protocol. Digital and analog inputs and outputs can be activated. Analog signals can be displayed using the J-1939 display. The trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. This unit is equipped with an integrated electronic fault box containing 12 faults.
The training aid includes a complete curriculum to make teaching CAN Bus as easy as possible.
The CAN Bus training system can be purchased as a single-sided (-1S) or double-sided (-1D) training system, or used in combination with the ConsuLab Automotive Lighting System trainer CL-MP-1918.
-
Multiplex Network Diagnostic Trainer
The MP-750 is a totally functional vehicle CAN Bus trainer based on a Honda vehicle platform. It is a highly effective training system used for teaching the operation and concepts of Multiplex and CAN Bus systems in a highly accessible format for easy diagnosing and repair of CAN Bus circuits.
-
Alternator Trainer with PCM-Controlled Regulation
The EM-500-03 trainer allows instructors to demonstrate the operation of automotive charging systems controlled by a PCM. The synoptic diagram and the layout of all the control and instrumentation units provide clear and simple operation explanations to the user. The trainer is very reliable and equipped with all safety equipment required for demonstration. The EM-500-03 alternator trainer with a PCM controlled voltage regulator contains a variable speed drive that modulates alternator input (engine speed) as in an actual vehicle. The alternator has been modified to accommodate a load current of 25A in order to demonstrate the full load charging characteristic and allow the regulator to run at 100% capacity. This trainer can be used to help students understand the operation and common testing procedures of the charging system with PCM controlled regulation.
