A6 - Electrical/Electronic Systems
Showing 1–12 of 24 results
-
Tesla Electric Vehicle Training System
The ConsuLab EV-601-TS is a fully functioning Electric Vehicle Training System based on the Tesla Model 3 Platform. What better way to teach all things EVs than on the world’s leading electric vehicle manufacturer, Tesla.
We are proud to release premier Electric Vehicle Training System available on the market today, the ConsuLab EV-601 iDEV Tesla Training Car. Featuring a functional Tesla Model 3 with OEM components and technologies.
Have you ever wondered how to give your students hands-on exploration of a complete electrical vehicle in a safe environment? The EV-601-TS_053322 ALL EV iDEV training car by ConsuLab is not just a training aid, it’s an actual Tesla Model 3 training car visually displayed for maximum learning! All major components are identified in their actual location, most have been exposed (cutaway) in a way that is not possible on an operating vehicle, this helps attain a better understanding of their internal components and workings.
Complete with practical training activities and curriculum!
-
Connector Trainer – Circuit and Signal Acquisition Classroom Pack
An Innovating Automotive Backprobing Trainer
Get our Classroom Pack with 12x of our innovative new training aids for teaching future automotive technicians the needed industry skills of backprobing.
ConsuLab has created an intuitive student-led learning system for Automotive Technology students to practice proper non-destructive back-probing of connectors and components while measuring voltages, resistances, and waveform signals using both oscilloscopes and digital multimeters. Developed for Toyota, this is an incredible – industry-demanded – training system for future automotive technicians.
The tabletop format makes it easy to use and accessible for students to learn in an intuitive way, but store and transport easily when not in use.
The CL-1930 Connector and Harness trainer includes a simulated ECU, multiple sensors and connectors, and a power supply. Student competency can be measured through instructor-controlled fault scenarios that students then diagnose.
This interactive product provides an exciting learning experience for students to practice and perfect their skills. All connectors, terminals and components are field serviceable.
-
Connector Trainer – Circuit and Signal Acquisition
An Innovating Automotive Backprobing Trainer
ConsuLab has created an intuitive student-led learning system for Automotive Technology students to practice proper non-destructive back-probing of connectors and components while measuring voltages, resistances, and waveform signals using both oscilloscopes and digital multimeters. Developed for Toyota, this is an incredible – industry-demanded – training system for future automotive technicians.
The tabletop format makes it easy to use and accessible for students to learn in an intuitive way, but store and transport easily when not in use.
The CL-1930 Connector and Harness trainer includes a simulated ECU, multiple sensors and connectors, and a power supply. Student competency can be measured through instructor-controlled fault scenarios that students then diagnose.
This interactive product provides an exciting learning experience for students to practice and perfect their skills. All connectors, terminals and components are field serviceable.
-
ADAS (Advanced Driver Assist Systems) Trainer
With the ADAS Trainer, you’ll be teaching the most advanced concepts in vehicle safety and automation. As the automotive industry has evolved, the role of sensors in today’s vehicles has become more important. Unfortunately, these systems can be challenging to understand without hands-on experience, which is why the ADAS Trainer is essential.
This training system breaks down the elements of advanced driver assist systems and autonomous vehicle concepts, providing a clear and concise look at the technologies involved. Thanks to our advanced simulations, students will be able to visualize the data collected by each sensor, as well as where they are located in a vehicle. Then, they’ll be able to analyze that data to understand how each sensor contributes to overall vehicle operation.
The EV-360 ADAS Training System was designed to demonstrate the fundamental concepts and technologies currently incorporated in today’s advanced vehicles.This trainer allows a student to visualize sensor readings and results, literally locating where the components are on a vehicle and compares the strengths and weaknesses of the various sensors and technologies to one another. This trainer is a scale model, providing visual cues to help students recognize design function and orientation.
-
Ohm’s Law & DC Circuits Trainer Classroom Pack
The ConsuLab CL-1919-05 Ohm’s Law & DC Circuits Trainer is a self-contained educational learning system designed to assist instructors in teaching students basic electrical and electronic theory. This is a classroom Pack of 12x Trainers and mobile, locking storage cabinet. Perfect for Automotive, Electrical, and Diesel Classrooms.
It is designed to help teach Ohm’s Law basics as well as demonstrating common electrical system components and circuit operation. A student project manual provides circuit construction and learning assignments designed to help students learn. The trainer is protected with a removable metal cover. The case features a carrying handle and has internal storage for jumper test leads and power cord.
-
EV High Voltage Safety and Disconnect Trainer
The EV-400 EV High-Voltage Safety Trainer represents a fully functional battery electric vehicle (BEV) in a compact classroom sized package. It provides an intuitive, hands-on experience for high-voltage testing, Personal Protective Equipment (PPE) use including gloves and insulated tools, high voltage isolation testing with a mega-ohmmeter, high voltage interlock circuits, first responders’ loops, three phase motor control, high voltage power distribution, and much more.
The ConsuLab EV-400 High Voltage EV Training System has a fault box and a faulty component, allowing for learners to practice realistic diagnostics procedures. The system reacts as a real BEV, demonstrating functions of various scenarios and components. All in a completely safe, controlled, classroom environment.
The ConsuLab EV-400 High-Voltage Safety Trainer includes student assignments and practical exercises that (when combined with the required prerequisites) prepare a technician or instructor to successfully complete the CSA Group Automotive Electric Vehicle Technician Certification.
EV-400: Mastering Electric Vehicles in a Safe, Interactive Environment
The EV-400 High Voltage system is a must-have training tool for modern automotive classrooms. With over 90 testable functions, the EV-400 allows students to hone diagnostic skills with a built in fault box emulating common EV High Voltage issues. It’s not just about demonstration; it’s about active engagement, hands-on learning, and real-world application.Available in single training systems or as classroom packages of 12 training systems.
-
Ohm’s Law & DC Circuits Trainer
The CL-1919-06 Ohm’s Law & DC Circuits trainer is a self-contained educational learning system designed to assist instructors in teaching students basic electrical and electronic theory. It is designed to help teach Ohm’s Law basics as well as demonstrating common electrical system components and circuit operation. A student project manual provides circuit construction and learning assignments designed to help students learn. The trainer is protected with a removable metal cover. The case features a carrying handle and has internal storage for jumper test leads and power cord.
-
Series-Parallel Circuit Trainer
The Modular Magnetic Training System – MagMat – is a cutting-edge teaching tool designed to help students grasp fundamental electrical concepts and vehicle-specific circuits. Ideal for classroom settings, this system combines hands-on learning with real-world applications, making complex electrical theory accessible and engaging. Learn electrical fundamentals and take your circuit directly to the car, vehicle, tractor, and beyond!
Why Choose the MagMat?
- Interactive and Engaging: Leverage magnetic surfaces like classroom whiteboards to create dynamic and hands-on learning experiences.
- Practical Diagnostics: Teach students how to design circuits, introduce or remove faults like high resistance and open circuits, and understand real-time diagnostics for practical problem-solving.
Key Features of the MagMat:
- Magnetic Circuit Components: Includes printed circuit boards with integrated resistors, LEDs, switches, and wiring diagrams for seamless learning and experimentation.
- Versatile Nodes: Wires, LEDs, switches, and splices allow students to create, modify, and troubleshoot various circuit configurations with ease.
Empower your students with the Magnetic Mat Electrical Training System, the ultimate classroom solution for mastering electrical fundamentals and diagnostics with hands-on practice.
-
Speed & Positions Sensors Trainer
The EM-200-25 Speed and Position Sensors trainer is used to demonstrate the operation, diagnosis and testing of common types of analog and digital speed and position sensors as they operate on a real vehicle all in one convenient place.
The trainer provides a safe and effective method of demonstrating the operating principles of different types of speed and position sensors that are common on today’s cars and trucks normally used for wheel speed, engine speed and vehicle speed.
All sensors are mounted on a common shaft which is driven by a variable speed electric motor to create different operating conditions. Comes with complete curriculum and courseware! -
Electromagnetism Trainer
The ConsuLab CL-1902 Electromagnetism trainer is designed for your students to physically demonstrate, test, measure, and experience electromagnetism using a “hands-on” approach to learning. Many aspects of a modern vehicle, whether a car, truck, combustion powered, hybrid or electrically driven, depend on some form of electromagnetism.
The ConsuLab Electromagnetism Trainer is a perfect fit for principles of Automotive Tech classrooms, STEM, or electrical courses.
-
Automotive Lighting System Trainer
The ConsuLab Automotive Lighting System Trainer CL-1918 is used for teaching Ohm’s Law, basic circuits, advanced circuits, relay controlled, power side and ground side-controlled circuits, and there is an included fault box on each side with 12 real world faults that include open circuits, short circuits, high resistance circuits that will require voltage drop testing to verify, ground faulted circuits and more.
The ConsuLab CL-1918 Automotive Lighting System Trainer has been developed to teach modern automotive lighting systems through student led learning exercises where students develop their understanding of the system through the physical wiring all circuits.
The learning exercises are developed at two levels to allow both entry level and advanced level students to expand their skills.
Available in both single or double-sided form factors. Can be used in combination with the ConsuLab CAN BUS Trainer.
-
CAN Bus Multiplex Trainer
The ConsuLab MP-1918 is a CAN Bus Multiplex trainer that communicates in J-1939 protocol. Digital and analog inputs and outputs can be activated. Analog signals can be displayed using the J-1939 display. The trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. This unit is equipped with an integrated electronic fault box containing 12 faults.
The training aid includes a complete curriculum to make teaching CAN Bus as easy as possible.
The CAN Bus training system can be single-sided (-1S), double-sided (-1D), or used in combination with the ConsuLab Automotive Lighting System trainer.
