Mechatronics

Read More...

Showing 13–24 of 41 results

  • Vacuum-Held Material Handling Training System – MAP-202

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-202: Vacuum-Held Handling Device with Two Shafts

    MAP-202: The function of this handling device is to transfer the part from a starting area to a final unloading area, using three vacuum pads. This is a cartesian handling device with two shafts which moves a part from one position to another, holding it with a set of three vacuum pads.

  • Vertical Revolving Material Handling Training System – MAP-203

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-203: Vertical Revolving Handling Training System with Internal Gripper

    The function of this material handling device is to transfer the part from a starting area to an unloading area, using an internal gripper. The part used in this process is a bearing so that when it is placed on the unloading area, it fits perfectly onto a stainless steel pivot with a slightly smaller diameter than the bearing’s inner diameter.

  • Horizontal Rotolinear Material Handling Training System – MAP-204

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-204: Vertical Revolving Handling Training System with Internal Gripper

    The function of the handling device is to transfer the part from a starting area to an unloading area through a rotolinear actuator that displaces an outer gripper. The part being transported is a metal bearing.

    The part used is made from anodized aluminum, 14.6mm diameter and 41mm height, so that when the part is placed on the unloading area it fits perfectly onto a stainless steel pivot with a slightly larger diameter than the shaft.

  • Mini-Cell Material Handling Assembly MAP-205

    The MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    The MAP-205 combines the MAP-201, MAP-202, MAP-203, and MAP-204 into a single integrated mini-cell assembly.

    The MAP-205 assembles and disassembles a product (metal turning mechanism) via 4 handling devices working together on a single tabletop frame.

    1. Feeding the base
    2. Assembling the bearing
    3. Inserting the shaft
    4. Placing the lid
  • Modular Assembly System MAS-200

    Build upon your mechatronics and automation studies with the MAS-200 Modular Assembly System from industry-leaders at SMC.

    This hands-on training system emulates a real industrial assembly process, incorporating the major technologies required by today’s automated industry into one, compact system.

    The complete system consists of five stations that work both independently and in unison to assemble a complete product with a metal base, bearing, shaft and lid.  The fifth station is located between the others and is responsible for transferring and assembling the parts; which can be done via a pneumatic assembly or robotic assembly.

    The modular design of the equipment allows a vast range of options since the stations are completely autonomous, but can be assembled to form a complete manufacturing cell.

    MAS-201: Base Feeding Station

    MAS-202: Bearing Insertion Station

    MAS-203: Shaft Insertion Station

    MAS-204: Lid Positioning Station

    MAS-205: Transfer and Assembly Station – Robotic or Pneumatic

  • Servo (Drives) Motion Training System

    The Servo Motion Training System provides participants with hardware allowing for hands-on experiments in setup,

    configuration and programming and servo drives for rotary or linear motion. The system gives access to onboard input and

    output devices in addition to providing connectivity for external devices.

    The system can be purchased with a Motion-Capable PLC or utilized in combination with an existing motion-capable PLC.

    Tabletop or Suitcase Form Factor

    • 120Vac Power Entry
    • Emergency Stop
    • (3) Selector Switches (Enable, + Over-Travel, – Over-Travel)
    • (2) Homing Sensors
    • (2) Servo Rotary Axis
    • (2) Servo Drives
  • SMC Tabletop Automation Training Modules with PLC

    New Training Product for engineering, automation and mechatronics classrooms!

    Unlock the potential of your engineering, automation, and mechatronics classrooms with our cutting-edge SMC ATM-200 training system, now featuring Allen Bradley PLCs.

    What sets the SMC ATM-200 apart is its versatility and functionality. Comprising three tabletop training aids, each equipped with a state-of-the-art data acquisition module, students gain practical experience in control and simulation using SMC’s autoSIM-200 software. But that’s not all – with an integrated Allen Bradley Micro800 PLC, learners can seamlessly transition to industrial programming using Rockwell Automation’s Connected Components Workbench.

    With the SMC ATM-200, students delve deep into fundamental logic and control principles through autoSIM-200 before harnessing the full potential of an industrial processor with the PLC. From mastering electricity and pneumatics to honing programming skills and understanding sensor technologies, our training system offers a comprehensive curriculum that prepares students for real-world challenges in the manufacturing sector.

    Each training module includes three tabletop training stations and a site license to access the autoSIM simulation software. This allows for virtual training in essential areas such as pneumatics, electrical circuits, hydraulics, and control systems, ensuring that every student has the tools they need to succeed.

    Empower your students with the skills and knowledge they need to thrive in today’s competitive job market. Invest in the SMC ATM-200 and watch as your classroom becomes a hub of innovation, creativity, and hands-on learning in the exciting world of manufacturing.

  • SMC Tabletop Intro to Automation Training Modules (ATM-200)

    SMC’s tabletop intro to Automation Training Module, ATM-200, is the perfect training system for high school automation, mechatronics, and exploratory career pathways. Learn and acquire hands-on skills in electricity, pneumatics, programming, sensors, and more!

    Each training module consists of (3) tabletop training stations and site license to autoSIM simulation software for virtual training in pneumatics, electrical, hydraulics, and control circuits.

  • 4-Station Flexible Manufacturing System i4o

    The best just got better with this incredible training from SMC! The FMS-200 Special Edition Industry 4.0 takes the most popular industrial advanced mechatronics training system on the market and combines it with advanced Industry 4.0 technologies for real-world, skills-driven training for industry.

    The 4-Station Configuration brings classrooms a compact and expandable solution for hands-on Industry 4.0 training with built-in troubleshooting.

    Students will get industry-relevant hands-on training around the crucial skills demanded by manufacturing and industry. Industrial manufacturing skills student expect to receive include automation processes, safety, PLC programming, Distributed IO, smart devices, artificial vision, and more!

  • SMC Vacuum Technology Training System

    SMC, the worldwide leading manufacturer of Pneumatic Components and Technologies, has developed a training system specifically for hands-on skills development in Vacuum Technology. Featuring the most commonly found vacuum technologies found in industrial companies like Intel, Dell, Apple, Samsung, Toyota, and more, the VAC-400 is the training system needed for skills development training in vacuum technologies.

  • SMC Automated Process Control Training System

    The IPC-200 is SMC’s unique training solution specific to automation and process control. Commonly used for training in the food & beverage production and processing industries as well as pharmaceutical industry, the IPC-200 brings real-world industrial skills and technologies to students’ fingertips with an exciting and project-based tabletop training system.

    A fully modular and flexible automate process control system, the IPC-200 is comprised of three modules which can work individually or as a complete process line. Various configurations can be created to adapt the IPC-200 equipment to our users different requirements and budgets.

    IPC-200 emulates a liquid production and bottling plant and includes the technologies used in a continuous process industry, such as pneumatics, electric motors, sensors, continuous processes, programmable controllers, industrial communications, etc.

    It is built entirely from industrial materials so that student works with the same elements found in the working environment.

     

  • ABB Cobot FlexTrainer STEM Education Cell

    Go Faster! Go Farther! Go Further! Go Train on ABB’s new Collaborative Robot, GoFa CRB 15000!

    We are thrilled to bring ABB’s newest collaborative robot training system – the ABB Cobot FlexTrainer with ABB’s newest collaborative robot, the GoFa, to education.

    The mobile training platform features a sleek design and various industry training applications. Paired beautifully via ABB RobotStudio, students can get hands-on training and virtual/digital solutions with AR/VR.

    Now certified and authenticated by STEM.org!