Manufacturing

Read More...

Showing 13–20 of 20 results

  • Vertical Revolving Material Handling Training System – MAP-203

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-203: Vertical Revolving Handling Training System with Internal Gripper

    The function of this material handling device is to transfer the part from a starting area to an unloading area, using an internal gripper. The part used in this process is a bearing so that when it is placed on the unloading area, it fits perfectly onto a stainless steel pivot with a slightly smaller diameter than the bearing’s inner diameter.

  • Horizontal Rotolinear Material Handling Training System – MAP-204

    SMC’s MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    MAP-204: Vertical Revolving Handling Training System with Internal Gripper

    The function of the handling device is to transfer the part from a starting area to an unloading area through a rotolinear actuator that displaces an outer gripper. The part being transported is a metal bearing.

    The part used is made from anodized aluminum, 14.6mm diameter and 41mm height, so that when the part is placed on the unloading area it fits perfectly onto a stainless steel pivot with a slightly larger diameter than the shaft.

  • Mini-Cell Material Handling Assembly MAP-205

    The MAP-200s consist of a series of individual tabletop mechatronics training systems that carry out a specific and different material handling task commonly seen in industrial settings.

    Robust, Rugged, and Versatile, these tabletop hands-on training systems are designed to teach students a wide array of industrial automation – Pneumatics, Electrical, Industrial Safety and Automation Processes, PLC Programming, Sensors, and Troubleshooting!

    The MAP-205 combines the MAP-201, MAP-202, MAP-203, and MAP-204 into a single integrated mini-cell assembly.

    The MAP-205 assembles and disassembles a product (metal turning mechanism) via 4 handling devices working together on a single tabletop frame.

    1. Feeding the base
    2. Assembling the bearing
    3. Inserting the shaft
    4. Placing the lid
  • Modular Assembly System MAS-200

    Build upon your mechatronics and automation studies with the MAS-200 Modular Assembly System from industry-leaders at SMC.

    This hands-on training system emulates a real industrial assembly process, incorporating the major technologies required by today’s automated industry into one, compact system.

    The complete system consists of five stations that work both independently and in unison to assemble a complete product with a metal base, bearing, shaft and lid.  The fifth station is located between the others and is responsible for transferring and assembling the parts; which can be done via a pneumatic assembly or robotic assembly.

    The modular design of the equipment allows a vast range of options since the stations are completely autonomous, but can be assembled to form a complete manufacturing cell.

    MAS-201: Base Feeding Station

    MAS-202: Bearing Insertion Station

    MAS-203: Shaft Insertion Station

    MAS-204: Lid Positioning Station

    MAS-205: Transfer and Assembly Station – Robotic or Pneumatic

  • Servo (Drives) Motion Training System

    The Servo Motion Training System provides participants with hardware allowing for hands-on experiments in setup,

    configuration and programming and servo drives for rotary or linear motion. The system gives access to onboard input and

    output devices in addition to providing connectivity for external devices.

    The system can be purchased with a Motion-Capable PLC or utilized in combination with an existing motion-capable PLC.

    Tabletop or Suitcase Form Factor

    • 120Vac Power Entry
    • Emergency Stop
    • (3) Selector Switches (Enable, + Over-Travel, – Over-Travel)
    • (2) Homing Sensors
    • (2) Servo Rotary Axis
    • (2) Servo Drives
  • Conveyor and Logistics Automation Training System

    The Conveyor and Logistics Automation Training System with Troubleshooting is our industrial training solution for school and companies looking for practical and realistic hands-on training activities in areas such as Maintenance, Troubleshooting, and Programming of industrial automation technologies commonly seen in warehouses, logistics settings, and industrial automation factories.

    The mobile and modular system includes choices of PLC controller, Variable Frequency Drive, HMI’s, and conveyors. Conveyors stations can include: flatbed slider belt conveyors, roller bed belt conveyors, powered roller conveyor, plastic mesh conveyor, and more.

    Up to 32 Troubleshooting Faults can be incorporated so students can troubleshoot and repair faulted components.

  • 5-Station Smart Innovative Factory

    The 5-Station Configuration of the SMC SIF-400 takes a condensed yet robust look at hands-down the most remarkable, fully-connected Industry 4.0 Training Platform on the market for hands-on training, exploration, and research in advanced manufacturing industries: SMC’s SIF-400.

    SMC’s Industry 4.0 Smart Innovative Factory reproduces an industrial, cyber-physical smart factory – in both the production and supply chain – with a modular design of 14 interconnected stations for training and studies in connected systems, operational data and data analytics, IIoT, predictive and preventative maintenance, management execution software (MES), inventory tracking and control, cybersecurity, and more!

     

  • 4-Station Flexible Manufacturing System i4o

    The best just got better with this incredible training from SMC! The FMS-200 Special Edition Industry 4.0 takes the most popular industrial advanced mechatronics training system on the market and combines it with advanced Industry 4.0 technologies for real-world, skills-driven training for industry.

    The 4-Station Configuration brings classrooms a compact and expandable solution for hands-on Industry 4.0 training with built-in troubleshooting.

    Students will get industry-relevant hands-on training around the crucial skills demanded by manufacturing and industry. Industrial manufacturing skills student expect to receive include automation processes, safety, PLC programming, Distributed IO, smart devices, artificial vision, and more!