eLearning
Toolkit is proud to bring the very best eLearning solutions for CTE and workforce training. eLearning can be a powerful tool for Career and Technical Education classrooms, and Toolkit is here to make your training programs even more effective.
Whether it is to be used as a stand-alone “training system” or as a complement to hands-on training systems, eLearning has the ability to engage and immerse students in totally unique and effective ways.
We don’t believe eLearning has the ability to entirely replace physical, hands-on skills development, but we do believe that is has an important role in captivating student interest/attention, and providing holistic training experiences to students.
Toolkit has a wide array of eLearning training solutions for CTE ranging from Industry 4.0 and advanced manufacturing, skills trades, HVAC, Electrical, Robotics, and More.
Showing all 8 results
-
ELECTUDE Automotive Essentials
ELECTUDE’s Automotive Essentials is a virtual world for students to learn and practice automotive troubleshooting skills using the “Engine Diagnostic Trainer” on realistic engines using a variety of virtual diagnostic tools. Students learn the basics and the advanced aspects of automotive diagnostics in an entirely virtual environment. It’s the most comprehensive and effective automotive e-learning solution currently available, and we always recommend pairing with ConsuLab Automotive Training Systems for complete, holistic learning.
Designed to match the visual and kinesthetic learning styles of most automotive students, ELECTUDE’s Automotive Essentials will give learners a thorough understanding of the fundamentals of automotive technology.
It has been designed to cover all the areas of NATEF, IMI, City & Guilds, Lernfelder, TESDA, Grado Superior and other national qualification standards.
- Over 1000 lessons & quizzes
- Includes LMS
- Includes the Simulator
- Updated weekly
- Mobile device access
- 99.9% uptime
- Over 35 languages
-
ELECTUDE Courseware for Ohm’s Law Trainer
The perfect eLearning complement to Consulab’s Ohm’s Law & DC Circuit Trainer, ELECTUDE’s courseware consists of 35 student-led learning modules and over 19.5 hours of instruction with practical set-up and the associated eLearning.
Students learn basic electric and electronic theory with a combination of Electude lessons, ConsuLab’s Ohm’s Law training system, and follow-up activities. The training aid includes a multimeter, as well as jumper wires to allow students to build circuits for various components, learn series and parallel circuit construction and complete measurements and diagnosis.
The practical set-up contains a multimeter and all necessary components that can be connected to each other with the help of the accompanying wiring set, and is used to teach participants the most important basic concepts from electrical engineering, including: Ohm’s law, using the multimeter, building circuits and measuring circuits/components.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Speed and Position Sensors Trainer
The perfect eLearning complement to ConsuLab’s Speed and Position Sensors Trainer, ELECTUDE’s courseware consists of 8 student-led practical assignments and over 9.5 hours of instruction.
Learners develop diagnostic skills using this blended e-learning and mechanical training aid package. The combination of Electude’s e-learning modules with ConsuLab’s tabletop sensors training system creates a dynamic, hands-on environment for every level of learner. The package covers some of the most common analog and digital sensors, including hall effect and magneto resistance.
With this practical set-up, the participant can supplement previously acquired knowledge of sensors with practical skills. The practical set-up contains four sensors for determining speed and position; inductive, Hall, MRE with internal and MRE with external magnet.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Fuel Injection and Engine Management Trainer
The perfect eLearning complement to ConsuLab’s Fuel Injection and Engine Managment Trainer, ELECTUDE’s courseware consists of 18 student-led practical assignments and over 19 hours of instruction.
The EM-330-1 Fuel Injection and Engine Management Trainer consists of a practical setup and the associated eLearning. With this practical setup, the participant can supplement previously acquired knowledge about the engine management system with practical skills.
Teach the working principles of a fully function Engine Management system but within the advantages of a safe and cost effective learning environment. Due to the presence of control buttons, sensor values can be changed, and the Engine Management system will respond to this with the control of its actuators. This allows the functioning of the system (cause and effect) to be experienced and understood by students. Because the Trainer has a Break-out box with measurement connections and an OBD-plug, students can perform measurements on the system using a multimeter, oscilloscope or diagnostic tester.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Automotive Lighting Trainer
The perfect eLearning complement to ConsuLab’s Automotive Lighting System Trainer, ELECTUDE’s courseware consists of 24 student-led practical assignments and over 25.5 hours of instruction.
Teach the working principles of vehicle lighting systems. This practical setup consists of three panels representing the front, back and side lighting of a vehicle. They are operated by the center control panel consisting of switches, fuses, relays and more. Student will learn to read wiring diagrams, connect and test (sub)systems. Student will also learn to troubleshoot system defects by the use of an 12x faultbox and step-by-step guidance. This set-up is perfect to train students in their basic electrical- and diagnosis skills.
The Automotive lighting system Trainer consists of a practical setup and the associated E-learning. The practical setup consists of three panels with all components that represent the lighting system of a vehicle. The components are connected to each other using the corresponding wiring set. In addition, the set-up is extremely suitable for teaching diagnostic work. Through guided troubleshooting and 12 work orders (incl. Complaint description) practical situations are simulated in which the participant can practice in a safe learning environment.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for CAN Bus Multiplex Trainer
The perfect eLearning complement to ConsuLab’s CAN bus Multiplex Training System, ELECTUDE’s courseware consists of 15 student-led practical assignments and over 17 hours of instruction.
Teach the working principles of CAN-bus and network communication in an engaging eLearning environment complemented with physical hands-on training system from ConsuLab. Teaching concepts and skills around CAN bus technology has never been more fun, exciting, and accessible with Toolkit’s ELECTUDE + ConsuLab offering.
This practical set-up consists of four control units, switches, sensors and a lighting system, representing a fully operational CAN- bus network that communicate via the J-1939 protocol. Both analog and digital signals can be measured with a multimeter or oscilloscope. In addition, sensor values can be made visible through an information display. The Trainer is also equipped with 12x faultbox. This set-up is ideal for teaching the principles of CAN-bus networks, CAN-bus communication, CAN-bus diagnostics and CAN-bus lighting systems.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Ignition System Trainer
The perfect eLearning complement to ConsuLab’s Coil-on-Plug Ignition System Trainer, ELECTUDE’s courseware consists of 1 student-led practical assignments and over 9 hours of instruction.
Using the tabletop EM-200-14 Coil-on-Plug Ignition System Training Aid from ConsuLab and ELECTUDE eLearning, students can clearly visualize the ignition system and complete hands-on activities designed to reinforce lesson modules. Four operational faults can be inserted with terminal block receptacles as diagnostic test points. The training aid also includes:
- Engine Control Module (ECM)
- Crankshaft Position Sensor
- Camshaft Position Sensor
- Electric motor-driven crankshaft and/or crankshaft sprockets
- OBD II data link connectors
- Wiring diagrams in both the courseware and the training aid
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for EVAP System Trainer
The perfect eLearning complement to ConsuLab’s EVAP (Evaporative Emissions) Trainer, ELECTUDE’s courseware consists of 9 student-led practical assignments and over 9.5 hours of instruction.
The ELECTUDE EM-200-22EVAP system courseware consists of a practical set-up and the associated E-learning. This practical set-up allows the participant to supplement previously acquired knowledge of the sensors with practical skills.
Teach the basics of the EVAP with this combination of ELECTUDE modules and ConsuLab’s desktop EVAP training aid. E-learning modules teach the purpose of emissions systems, explain leak tests and demonstrate how to identify and test valves and sensors. The training aid reinforces these concepts with functional fuel tanks, valves, sensors, controls, and DVOM test points.
Check Out the FREE Demo Under “Software Package”
