Automotive Technology
Shop by ASE Category
Showing 25–36 of 106 results
-
Coil on Plug Ignition System Trainer
The ConsuLab EM-200-14 trainer allows for the demonstration of a complete ignition system with real-world components using COP technology. Terminal block receptacles are provided for diagnostic test points. A 12V source is required to operate the trainer.
-
Distributor Ignition System Trainer
The ConsuLab EM-200-12 Distributor Ignition System Trainer, is a training board used to teach the ignition system with distributor. The trainer is manufactured using brand new OEM components.
-
Four-Wheel Honda ABS Trainer with Faults
ConsuLab’s EM-122-HN02 Four-wheel Honda ABS trainer is used to demonstrate the functionality of the ABS braking system as it operates on a real vehicle. This automotive training aid includes mechanical faults in the friction components, which are designed to be diagnosed by students while performing a brake inspection.
This trainer also comes with six insertable, electronic faults, and is built with OEM components based on the 2006-2010 Honda Civic platform. The trainer can be used in the classroom environment for demonstrations to students.
The instructor can manually select which wheel combinations are desired to lockup prior to application of brake pedal. The trainer provides a safe and effective method of demonstrating the principles of braking systems used on today’s vehicles.
All routine brake service procedures can be performed on this trainer including component replacement, adjustments and hydraulic bleeding
-
Two-Wheel Hydraulic Brake Trainer (Non-ABS)
The Consulab Two Wheel Hydraulic Brake System Trainer EM-123-2_053251 is a 2-wheel hydraulic brake system trainer that is used to demonstrate the functionality of a typical non-ABS braking system as it operates on a real vehicle.
The trainer is built with OEM components and is based on the non-ABS Honda Civic platform. The trainer can be used in the classroom environment for demonstrations to students. The trainer provides a safe and effective method of demonstrating the principles of hydraulic braking systems used on today’s vehicles.
This brake trainer is made to order and comes complete with curriculum and student activity manuals.
-
4-Wheel Hydraulic Brake Trainer with Disc and Drum + Faults
The ConsuLab EM-123-4HN02 Disc & Drum Brake Trainer with Faults is used to demonstrate the functionality of a modern automotive hydraulic braking system as it functions on vehicle.
The inclusion of four permanent, mechanical, real-world faults captures students attention and proves their learning. The product is built using recycled OEM components for the platform and all wear items are brand new (discs, pads, drums, shoes, etc.).
The EM-123-4HN02 Disc and Drum Brake training aid has an extremely small footprint and can fit into any classroom, even your office for robust automotive training anywhere! It fits through a 30″ door.
All routine brake service procedures can be performed on this trainer including:
• Master cylinder service
• Brake pad/shoe replacement
• Disc/Drum service
• Wheel bearing service
• Caliper/Wheel cylinder service
• Brake hose/line service
• Parking brake service -
Relay Lab Kits Pro
This hands-on learning tool from Switch Labs is designed to teach the functions and wiring of relays, switches, and lights while preparing students to wire up the dash on a Switch EV Kit Car. Includes 5 – 100-foot spools of wire, ferrule connectors, instructions, schematic and testing procedure.
-
Hybrid Planetary Gearset Trainer
The ConsuLab EM-200-29 Hybrid Planetary Gear-Set Trainer is designed to help instructors teach and students to understand the somewhat complex operation of a typical hybrid vehicle drivetrain. Based on a typical Toyota Prius hybrid vehicle, the trainer provides easy visualization of driveline component operation including:
- ICE (Internal Combustion Engine)
- MG1 (Motor/generator # 1)
- MG2 (Motor/generator # 2)
- Drive wheels
-
Cutaway Toyota Prius Hybrid Drive Train
The EC-140H Cutaway Toyota Prius Hybrid Drive Train is a training system designed specifically for teaching how a typical hybrid drive train operates. The trainer consists of all cutaway drive train components from a Toyota Hybrid Synergy Drive system including:
- ICE (internal combustion engine)
- Torque damper assembly
- MG1 (motor/generator #1)
- Planetary gearset (power split device)
- MG2 (motor/generator #2)
- Transaxle
- Inverter
- HV (high voltage) battery (non-functional)
The ICE, MG1, MG2 and differential output/drive wheels are driven with external electric motors via connecting chains. This design allows the demonstration of eight of the possible hybrid operating modes. All components are cutaway to allow clear student visual learning.
-
Alternator Trainer with PCM-Controlled Regulation
The EM-500-03 trainer allows instructors to demonstrate the operation of automotive charging systems controlled by a PCM. The synoptic diagram and the layout of all the control and instrumentation units provide clear and simple operation explanations to the user. The trainer is very reliable and equipped with all safety equipment required for demonstration. The EM-500-03 alternator trainer with a PCM controlled voltage regulator contains a variable speed drive that modulates alternator input (engine speed) as in an actual vehicle. The alternator has been modified to accommodate a load current of 25A in order to demonstrate the full load charging characteristic and allow the regulator to run at 100% capacity. This trainer can be used to help students understand the operation and common testing procedures of the charging system with PCM controlled regulation.
-
Cutaway Starting System Trainer
The ConsuLab EM-200-19 Automotive Starting System Trainer allows for the demonstration of a complete starting system using real-world components. Key areas of the starter have been cutaway to allow visual observation of major components while still being functional.
-
Electric Power Steering Trainer
The ConsuLab EM-200-18 Electric assist power steering trainer is a functional column-mounted electric assist unit for use in a classroom environment. Once connected to a 12V battery and using the supplied handles, you and your students can vary the input torque with one hand and experience the output torque with the other hand all while viewing the scan tool data live through the provided OBD2 DLC and built-in ammeter.
-
Power Seat System Trainer
The EM-200-05 trainer allows for the demonstration of a complete power seat system using real-world components. Terminal block receptacles are provided for diagnostic test points. Fault insertion included. The trainer requires a 12V power supply to operate.
