Manufacturing
Showing 13–19 of 19 results
-
PLC Automation Training System | all-in-one
The ATS-200 Automation Training System provides students with a hardware platform for performing hands-on skills development activities for automation technologies operations. The tabletop or mobile platform includes various applications which can be quickly connected to provide advanced activities, expanding the learning objectives beyond simple on/off functionality.
The all-in-one PLC Training System includes:
◉ Operator Control Application
◉ Sensors and Switches Application
◉ Pneumatic Actuator/Valve Application
◉ Linear Ball Screw Application
◉ BCD Thumbwheel and 7 Segment Display
◉ Dual Analog Potentiometer and Meters
◉ Motor Control Application
◉ Variable Speed Drive (Any Brand)
◉ PLC (Any Brand)
◉ HMI (Any Brand)
◉ PID Pressure Application
◉ PID Temperature Application
The system shown as tabletop trainer with banana jack connections. The unit can be purchased with a mobile frame with all components pre-wired to the PLC requiring no additional connections.
-
SMC Three-Phase Separator
The new 3-Phase Separator Training System from SMC emulates the industrial separation process of the oil, gas and water obtained from oil wells during the oil production process. The process is performed with all gaseous and liquid components in a pressurized container.
A Three Phase Separator for oil production is a large container designed to separate the fluids obtained from the well into its individual constituent components: oil, gas and water. These types of separators are based on the principle that the three components have different densities. This allows separating them when they move slowly, the gas in the upper part, the water in the bottom and the oil in the middle.
SMC’s new 3-Phase Separator Training System includes all hardware, software, and learning content for effective training in process control and three-phase separation concepts.
-
Robotized Assembly System
SMC’s Robotized Assembly Training System, the RAS-400, allows learners to get a real-world look at fully automated assembly environments featuring your choice of industrial robot(s).
This modular robotized assembly system consists of 4 different industrial robot stations forming a flexible automation cell. The process includes an entire series of
- Feeding
- Material handling
- Assembly verification
- Loading operations
All operations are carried out using components from different technologies (pneumatics, vacuum, sensors, etc.) that students will have to understand and apply. The primary training focus of this training system is industrial robotics, including collaborative robots.
-
Tesla Electric Vehicle Training System
The ConsuLab EV-601-TS is a fully functioning Electric Vehicle Training System based on the Tesla Model 3 Platform. What better way to teach all things EVs than on the world’s leading electric vehicle manufacturer, Tesla.
We are proud to release premier Electric Vehicle Training System available on the market today, the ConsuLab EV-601 iDEV Tesla Training Car. Featuring a functional Tesla Model 3 with OEM components and technologies.
Have you ever wondered how to give your students hands-on exploration of a complete electrical vehicle in a safe environment? The EV-601-TS_053322 ALL EV iDEV training car by ConsuLab is not just a training aid, it’s an actual Tesla Model 3 training car visually displayed for maximum learning! All major components are identified in their actual location, most have been exposed (cutaway) in a way that is not possible on an operating vehicle, this helps attain a better understanding of their internal components and workings.
Complete with practical training activities and curriculum!
-
ADAS (Advanced Driver Assist Systems) Trainer
With the ADAS Trainer, you’ll be teaching the most advanced concepts in vehicle safety and automation. As the automotive industry has evolved, the role of sensors in today’s vehicles has become more important. Unfortunately, these systems can be challenging to understand without hands-on experience, which is why the ADAS Trainer is essential.
This training system breaks down the elements of advanced driver assist systems and autonomous vehicle concepts, providing a clear and concise look at the technologies involved. Thanks to our advanced simulations, students will be able to visualize the data collected by each sensor, as well as where they are located in a vehicle. Then, they’ll be able to analyze that data to understand how each sensor contributes to overall vehicle operation.
The EV-360 ADAS Training System was designed to demonstrate the fundamental concepts and technologies currently incorporated in today’s advanced vehicles.This trainer allows a student to visualize sensor readings and results, literally locating where the components are on a vehicle and compares the strengths and weaknesses of the various sensors and technologies to one another. This trainer is a scale model, providing visual cues to help students recognize design function and orientation.
-
Werk Wagon Portable Training Center
Toolkit is proud to offer schools and training facilities a completely customizable and mobile solution for workforce training, STEM education, CTE skills development with our new WERK WAGON portable training centers!
Completely customizable, modular and portable training in a whole new way. Our Werk Wagon is perfect for schools looking to bring their training and expertise into the community, or share resources between schools, or with physical space limitations that require larger bond and/or construction money. Toolkit’s Werk Wagons are mobile, portable Workforce Training Centers and simply amazing!
Customizable sizes, dimensions, and physical features allow these mobile training centers to fit perfectly to your needs and to focus on your needed training areas.
-
Cutaway Training Models
At Toolkit Technologies, we only bring the very best training aids, training systems, and industrial-quality technologies into the classroom. So for applications where you want to see, show, and demonstrate the inner workings of an object, look no further than our Custom Cutaway Creations.
We can create a visually intriguing cutaway display that will reveal the inner workings of any mechanical or electro-mechanical product. From concept to completion, we can make it happen. Our experience and expertise allows us to deliver the perfect training aid cutaway for your program. Or simply tell us what you’re looking for, and we’ll make it happen.
