Automotive Technology
Explore Toolkit’s solutions for Automotive Technology Training Systems for modern automotive classrooms.
The ever-increasing quantity of technologies found in modern vehicles, combined with the ever-increasing complexity of electronic systems and state-of-the-art technologies such as Advanced Driver Assistance Systems (ADAS), Smart Sensors, Autonomous Driving systems, Interconnected Systems, Computerized Diagnostic and Scan Tools, Plug-In Electric Vehicle and Hybrid technologies, etc. creates an increased need for automotive training to be done with modern, state-of-the-art technologies and training systems.
Modern Automotive Training Labs should keep pace with modern automotive vehicles on the road.
Automotive service technicians and mechanics can be expected to:
- Identify problems, often by using computerized diagnostic equipment
- Plan work procedures, using charts, technical manuals, and experience
- Test parts and systems to ensure that they work properly
- Follow checklists to ensure that all critical parts are examined
- Perform basic care and maintenance, including changing oil, checking fluid levels, and rotating tires
- Repair or replace worn parts, such as brake pads, wheel bearings, and sensors
- Perform repairs to manufacturer and customer specifications
- Explain automotive problems and repairs to clients
Although service technicians work on traditional mechanical systems, such as engines, transmissions, and drivebelts, they also must be familiar with a growing number of electronic systems. Braking, transmission, and steering systems, for example, are controlled primarily by computers and electronic components.
Other integrated electronic systems, such as accident-avoidance sensors, are becoming common as well. In addition, a growing number of technicians are required to work on vehicles that use electricity or alternative fuels, such as ethanol.
Service technicians use many different tools, including computerized diagnostic tools and power tools such as pneumatic wrenches, lathes, welding torches, and jacks and hoists, in addition to common hand tools like wrenches, pliers, and sockets.
Whether for transportation and logistics classrooms, agriculture and mechanics or manufacturing classrooms, Toolkit has the Automotive Service Technology Training Systems and ASE Certification-aligned solutions to fit your area’s industry training needs.
Job Outlook: 69,000 new jobs per year
Average Pay: $46,890
Shop by ASE Category
Showing 1–12 of 13 results
-
Werk Wagon Portable Training Center
Toolkit is proud to offer schools and training facilities a completely customizable and mobile solution for workforce training, STEM education, CTE skills development with our new WERK WAGON portable training centers!
Completely customizable, modular and portable training in a whole new way. Our Werk Wagon is perfect for schools looking to bring their training and expertise into the community, or share resources between schools, or with physical space limitations that require larger bond and/or construction money. Toolkit’s Werk Wagons are mobile, portable Workforce Training Centers and simply amazing!
Customizable sizes, dimensions, and physical features allow these mobile training centers to fit perfectly to your needs and to focus on your needed training areas.
-
Distributor Ignition System Trainer
The ConsuLab EM-200-12 Distributor Ignition System Trainer, is a training board used to teach the ignition system with distributor. The trainer is manufactured using brand new OEM components.
-
Ford Fusion 2.0L Engine Trainer with AC
The ConsuLab EM-140C-FD04 is a fully functional recycled engine mounted on a mobile stand. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.
-
F-Series Ford Diesel Truck Engine Bench
The EM-140D diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2011 Ford Pickup F Series w/ POWERSTROKE 6.7L, 8-cylinder diesel engine platform. Trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
Ram / Cummins Diesel Engine Bench 6.7L
The diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2013 Ram Trucks w/Cummins 6.7L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. The trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
ELECTUDE Automotive Essentials
ELECTUDE’s Automotive Essentials is a virtual world for students to learn and practice automotive troubleshooting skills using the “Engine Diagnostic Trainer” on realistic engines using a variety of virtual diagnostic tools. Students learn the basics and the advanced aspects of automotive diagnostics in an entirely virtual environment. It’s the most comprehensive and effective automotive e-learning solution currently available, and we always recommend pairing with ConsuLab Automotive Training Systems for complete, holistic learning.
Designed to match the visual and kinesthetic learning styles of most automotive students, ELECTUDE’s Automotive Essentials will give learners a thorough understanding of the fundamentals of automotive technology.
It has been designed to cover all the areas of NATEF, IMI, City & Guilds, Lernfelder, TESDA, Grado Superior and other national qualification standards.
- Over 1000 lessons & quizzes
- Includes LMS
- Includes the Simulator
- Updated weekly
- Mobile device access
- 99.9% uptime
- Over 35 languages
-
ELECTUDE Courseware for Ohm’s Law Trainer
The perfect eLearning complement to Consulab’s Ohm’s Law & DC Circuit Trainer, ELECTUDE’s courseware consists of 35 student-led learning modules and over 19.5 hours of instruction with practical set-up and the associated eLearning.
Students learn basic electric and electronic theory with a combination of Electude lessons, ConsuLab’s Ohm’s Law training system, and follow-up activities. The training aid includes a multimeter, as well as jumper wires to allow students to build circuits for various components, learn series and parallel circuit construction and complete measurements and diagnosis.
The practical set-up contains a multimeter and all necessary components that can be connected to each other with the help of the accompanying wiring set, and is used to teach participants the most important basic concepts from electrical engineering, including: Ohm’s law, using the multimeter, building circuits and measuring circuits/components.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Speed and Position Sensors Trainer
The perfect eLearning complement to ConsuLab’s Speed and Position Sensors Trainer, ELECTUDE’s courseware consists of 8 student-led practical assignments and over 9.5 hours of instruction.
Learners develop diagnostic skills using this blended e-learning and mechanical training aid package. The combination of Electude’s e-learning modules with ConsuLab’s tabletop sensors training system creates a dynamic, hands-on environment for every level of learner. The package covers some of the most common analog and digital sensors, including hall effect and magneto resistance.
With this practical set-up, the participant can supplement previously acquired knowledge of sensors with practical skills. The practical set-up contains four sensors for determining speed and position; inductive, Hall, MRE with internal and MRE with external magnet.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Fuel Injection and Engine Management Trainer
The perfect eLearning complement to ConsuLab’s Fuel Injection and Engine Managment Trainer, ELECTUDE’s courseware consists of 18 student-led practical assignments and over 19 hours of instruction.
The EM-330-1 Fuel Injection and Engine Management Trainer consists of a practical setup and the associated eLearning. With this practical setup, the participant can supplement previously acquired knowledge about the engine management system with practical skills.
Teach the working principles of a fully function Engine Management system but within the advantages of a safe and cost effective learning environment. Due to the presence of control buttons, sensor values can be changed, and the Engine Management system will respond to this with the control of its actuators. This allows the functioning of the system (cause and effect) to be experienced and understood by students. Because the Trainer has a Break-out box with measurement connections and an OBD-plug, students can perform measurements on the system using a multimeter, oscilloscope or diagnostic tester.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Automotive Lighting Trainer
The perfect eLearning complement to ConsuLab’s Automotive Lighting System Trainer, ELECTUDE’s courseware consists of 24 student-led practical assignments and over 25.5 hours of instruction.
Teach the working principles of vehicle lighting systems. This practical setup consists of three panels representing the front, back and side lighting of a vehicle. They are operated by the center control panel consisting of switches, fuses, relays and more. Student will learn to read wiring diagrams, connect and test (sub)systems. Student will also learn to troubleshoot system defects by the use of an 12x faultbox and step-by-step guidance. This set-up is perfect to train students in their basic electrical- and diagnosis skills.
The Automotive lighting system Trainer consists of a practical setup and the associated E-learning. The practical setup consists of three panels with all components that represent the lighting system of a vehicle. The components are connected to each other using the corresponding wiring set. In addition, the set-up is extremely suitable for teaching diagnostic work. Through guided troubleshooting and 12 work orders (incl. Complaint description) practical situations are simulated in which the participant can practice in a safe learning environment.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for CAN Bus Multiplex Trainer
The perfect eLearning complement to ConsuLab’s CAN bus Multiplex Training System, ELECTUDE’s courseware consists of 15 student-led practical assignments and over 17 hours of instruction.
Teach the working principles of CAN-bus and network communication in an engaging eLearning environment complemented with physical hands-on training system from ConsuLab. Teaching concepts and skills around CAN bus technology has never been more fun, exciting, and accessible with Toolkit’s ELECTUDE + ConsuLab offering.
This practical set-up consists of four control units, switches, sensors and a lighting system, representing a fully operational CAN- bus network that communicate via the J-1939 protocol. Both analog and digital signals can be measured with a multimeter or oscilloscope. In addition, sensor values can be made visible through an information display. The Trainer is also equipped with 12x faultbox. This set-up is ideal for teaching the principles of CAN-bus networks, CAN-bus communication, CAN-bus diagnostics and CAN-bus lighting systems.
Check Out the FREE Demo Under “Software Package”
-
ELECTUDE Courseware for Ignition System Trainer
The perfect eLearning complement to ConsuLab’s Coil-on-Plug Ignition System Trainer, ELECTUDE’s courseware consists of 1 student-led practical assignments and over 9 hours of instruction.
Using the tabletop EM-200-14 Coil-on-Plug Ignition System Training Aid from ConsuLab and ELECTUDE eLearning, students can clearly visualize the ignition system and complete hands-on activities designed to reinforce lesson modules. Four operational faults can be inserted with terminal block receptacles as diagnostic test points. The training aid also includes:
- Engine Control Module (ECM)
- Crankshaft Position Sensor
- Camshaft Position Sensor
- Electric motor-driven crankshaft and/or crankshaft sprockets
- OBD II data link connectors
- Wiring diagrams in both the courseware and the training aid
Check Out the FREE Demo Under “Software Package”