eLearning

Read More...

Showing 13–18 of 18 results

  • ELECTUDE Courseware for Speed and Position Sensors Trainer

    The perfect eLearning complement to ConsuLab’s Speed and Position Sensors Trainer, ELECTUDE’s courseware consists of 8 student-led practical assignments and over 9.5 hours of instruction.

    Learners develop diagnostic skills using this blended e-learning and mechanical training aid package.  The combination of Electude’s e-learning modules with ConsuLab’s tabletop sensors training system creates a dynamic, hands-on environment for every level of learner. The package covers some of the most common analog and digital sensors, including hall effect and magneto resistance.

    With this practical set-up, the participant can supplement previously acquired knowledge of sensors with practical skills. The practical set-up contains four sensors for determining speed and position; inductive, Hall, MRE with internal and MRE with external magnet.

    Check Out the FREE Demo Under “Software Package”

  • ELECTUDE Courseware for Automotive Lighting Trainer

    The perfect eLearning complement to ConsuLab’s Automotive Lighting System Trainer, ELECTUDE’s courseware consists of 24 student-led practical assignments and over 25.5 hours of instruction.

    Teach the working principles of vehicle lighting systems. This practical setup consists of three panels representing the front, back and side lighting of a vehicle. They are operated by the center control panel consisting of switches, fuses, relays and more. Student will learn to read wiring diagrams, connect and test (sub)systems. Student will also learn to troubleshoot system defects by the use of an 12x faultbox and step-by-step guidance. This set-up is perfect to train students in their basic electrical- and diagnosis skills.

    The Automotive lighting system Trainer consists of a practical setup and the associated E-learning. The practical setup consists of three panels with all components that represent the lighting system of a vehicle. The components are connected to each other using the corresponding wiring set. In addition, the set-up is extremely suitable for teaching diagnostic work. Through guided troubleshooting and 12 work orders (incl. Complaint description) practical situations are simulated in which the participant can practice in a safe learning environment.

    Check Out the FREE Demo Under “Software Package”

  • ELECTUDE Courseware for CAN Bus Multiplex Trainer

    The perfect eLearning complement to ConsuLab’s CAN bus Multiplex Training System, ELECTUDE’s courseware consists of 15 student-led practical assignments and over 17 hours of instruction.

    Teach the working principles of CAN-bus and network communication in an engaging eLearning environment complemented with physical hands-on training system from ConsuLab. Teaching concepts and skills around CAN bus technology has never been more fun, exciting, and accessible with Toolkit’s ELECTUDE + ConsuLab offering.

    This practical set-up consists of four control units, switches, sensors and a lighting system, representing a fully operational CAN- bus network that communicate via the J-1939 protocol. Both analog and digital signals can be measured with a multimeter or oscilloscope. In addition, sensor values can be made visible through an information display. The Trainer is also equipped with 12x faultbox. This set-up is ideal for teaching the principles of CAN-bus networks, CAN-bus communication, CAN-bus diagnostics and CAN-bus lighting systems.

    Check Out the FREE Demo Under “Software Package”

  • ELECTUDE Courseware for Ignition System Trainer

    The perfect eLearning complement to ConsuLab’s Coil-on-Plug Ignition System Trainer, ELECTUDE’s courseware consists of 1 student-led practical assignments and over 9 hours of instruction.

    Using the tabletop EM-200-14 Coil-on-Plug Ignition System Training Aid from ConsuLab and ELECTUDE eLearning, students can clearly visualize the ignition system and complete hands-on activities designed to reinforce lesson modules. Four operational faults can be inserted with terminal block receptacles as diagnostic test points. The training aid also includes:

    1. Engine Control Module (ECM)
    2. Crankshaft Position Sensor
    3. Camshaft Position Sensor
    4. Electric motor-driven crankshaft and/or crankshaft sprockets
    5. OBD II data link connectors
    6. Wiring diagrams in both the courseware and the training aid

    Check Out the FREE Demo Under “Software Package”

  • ELECTUDE Courseware for EVAP System Trainer

    The perfect eLearning complement to ConsuLab’s EVAP (Evaporative Emissions) Trainer, ELECTUDE’s courseware consists of 9 student-led practical assignments and over 9.5 hours of instruction.

    The ELECTUDE EM-200-22EVAP system courseware consists of a practical set-up and the associated E-learning. This practical set-up allows the participant to supplement previously acquired knowledge of the sensors with practical skills.

    Teach the basics of the EVAP with this combination of ELECTUDE modules and ConsuLab’s desktop EVAP training aid. E-learning modules teach the purpose of emissions systems, explain leak tests and demonstrate how to identify and test valves and sensors. The training aid reinforces these concepts with functional fuel tanks, valves, sensors, controls, and DVOM test points.

    Check Out the FREE Demo Under “Software Package”

  • RobotStudio Simulation Software

    Offline programming is one of the best ways to maximize return on investment for robot systems in both industry and education. ABB’s simulation and offline programming software, RobotStudio, allows robot programming to be done on a PC in the office without shutting down production, which allows you to perform tasks such as training, programming, and automation optimization with ease and simplicity!

    The ABB Virtual Controller, an exact copy of the real software that runs your ABB robots in production, and ABB’s Teach Pendant, is built-into RobotStudio so training in the virtual environment exactly replicates real, hands-on training. This allows very realistic simulations to be performed, using real robot programs and configuration files identical to those used on the shop floor or in the classroom.

    RobotStudio is the world’s most used offline programming tool for robotics comes with a holistic package of features and add-ons for various applications.

    Ask Us How To Get ABB RobotStudio for FREE!