A8 - Engine Performance
Showing all 12 results
-
Fuel Injection & Engine Management Trainer
The ConsuLab EM-330-1 Fuel Injection and Engine Management Trainer functions as in a real automobile, but uses non-flammable fluid instead of gasoline for safety and educational purposes. The trainer is used to teach and demonstrate engine management systems in a vehicle. The advantage to the trainer comes in the fact that it produces no exhaust, will fit through virtually any doorway, has adjustable inputs and is the actual system used on the vehicle.
-
Coil on Plug Ignition System Trainer
The ConsuLab EM-200-14 trainer allows for the demonstration of a complete ignition system with real-world components using COP technology. Terminal block receptacles are provided for diagnostic test points. A 12V source is required to operate the trainer.
-
Distributor Ignition System Trainer
The ConsuLab EM-200-12 Distributor Ignition System Trainer, is a training board used to teach the ignition system with distributor. The trainer is manufactured using brand new OEM components.
-
Chevy Cruz 1.4L Engine Trainer + GDI + Start/Stop + HVAC + ConsuLink Student Learning
The Chevy Cruze 1.4-liter engine bench with GDI and start/stop technology is ConsuLab’s first engine bench to ever have 2 pedals (brake and accelerator)!
It has two pedals so you can do stall tests and load the engine – you can perform a basic “road test” within your classroom going up to 20mph which allows STOP/START to function!
Combine this with the new ConsuLink™ (Patent Pending) student learning platform to enhance student engagement and use this bench to teach advanced drivability, engine performance and HVAC (air conditioning).
-
CONSULINK Student Learning Platform: Hyundai GDI Engine Trainer
The EM-140S-HY03 engine performance trainer is an exciting new product that is designed for student-led learning through case studies using our new tablet-based ConsuLink™ (Patent Pending) Student Learning Platform (SLP) . Students today thrive on tablet-based learning tools and will adapt to the SLP easily. This trainer is based on a functional G4FD 2012-2017 Hyundai Accent 1.6L GDI engine. The unit is easy to work on and all major components match OEM configurations to make the service information relevant to the trainer.
-
Toyota Corolla 1.8L Engine Trainer with HVAC
The ConsuLab EM-140C-TYO2 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2014-2018 Toyota Corolla 1.8L global vehicle platform. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information. Trainer is mounted on a mobile stand constructed of powder coated 2” square steel tubing equipped with four 5” phenol casters (2 fixed and 2 swivel w/locks) for easy transport. Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.
-
Honda Civic 1.8L Engine Trainer with Fault Box
The ConsuLab EM-140C-HN01 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2012-2015 Honda Civic 1.8L global vehicle platform. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information. Trainer is mounted on a mobile stand constructed of powder coated 2” square steel tubing equipped with four 5” phenol casters (2 fixed and 2 swivel w/locks) for easy transport. Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.
-
GM Ecotec 2.2L Engine Trainer
The ConsuLab EM-140 engine performance trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2007 and newer GM ECOTEC 2.2L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5cm2) tubular steel equipped with four 5” phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
Toyota Yaris 1.5L Engine Trainer with Faults
The ConsuLab EM-140C-TY01 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2012-2018 Toyota Yaris 1.5L global vehicle platform. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information. Trainer is mounted on a mobile stand constructed of powder coated 2” square steel tubing equipped with four 5” phenol casters (2 fixed and 2 swivel w/locks) for easy transport. Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.
-
Fusion 2.0L Engine Trainer with AC
The ConsuLab EM-140C-FD04 is a fully functional recycled engine mounted on a mobile stand. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.
-
GM Cobalt or Pontiac G5 2.2L Ecotec Engine Trainer with HVAC
The ConsuLab EM-140 engine performance trainer with HVAC is a fully operational engine mounted on a mobile stand. Trainer is based on 2009-2010 and newer GM ECOTEC 2.2L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” tubular steel equipped with four 5” phenol casters (2-fixed and 2-swivel w/locks). Students can perform many ASE Education Foundation related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
Custom Motorcycle Engine Trainer
Safety, repeatability, space savings, fault insertion, testing and measurements, these are all part of the LV-140C solution that ConsuLab now offers to your motorcycle programs. Using the same techniques and expertise that we have developed over the past 20 years in automotive engine bench fabrication, we are now offering our service for motorcycles. We will take your supplied motorcycle (donation or purchased) and turn it into a pedagogical teaching tool.