Description
SMC, the worldwide leading manufacturer of Pneumatic Components and Technologies, has developed the most state-of-the-art and robust training system for teaching Pneumatics and Electro-Pneumatics Fundamentals to schools, training centers, and colleges. All components are industrial, used by companies around the world, so you can rest assured that your pneumatics learning directly translates to on-the-job relevance.
Modular Options allow for standard training on all-industrial components.
Pneu-401 Basic Pneumatics trainer includes:
Air Cleaning unit with 3/2 distribution valve
– 5 um filtering.
– It will include a 3/2 discharge valve with silencer for connection and disconnection of the rest of the circuit.
– Possibility of vertical and horizontal positioning.
QUANTITY: 1
Distribution block
– It will include 8-outlet distribution block, one Couch fittings and non-return system.
– Direct coupling to the air cleaning unit.
QUANTITY: 1
Pressure regulator with pressure gauge
– Operating pressure: from 0 to 10 bar.
– It will incIude double-scale pressure gauge.
QUANTITY: 1
1MPa pressure gauge
– It will include a double-entry and double scale: (0-1 MPa / 0-140 psi).
QUANTITY: 1
3/2 NC valve, operated by push button
– Grade-level push button, normally in closed position, spring return.
QUANTITY: 2
3/2 NC/NO valve, operated by a push button
– It will include a 3/2 port valve, which the user can convert from normally-open to normally-closed, as required.
– Spring-return.
QUANTITY: 1
3/2 NC valve, operated by an emergency knob
– Driven by approved emergency-type knob. Spring-return action.
QUANTITY: 1
FC 3/2 NC valve, operated by Roller lever
– Mechanical Roller action.
QUANTITY: 2
FC 3/2 NC valve. Operated by one-way roller lever
– One-way Roller lever.
QUANTITY: 1
3/2 NC switch-operated double valve
– It will include 3/2 port valve with locking system.
QUANTITY: 1
5/2 valve with 2-position selector
– Power-assisted valve driven by a locking switch.
QUANTITY: 1
3/2 NC/NO, air operated single valve
– It will include a 3/2 valve, which the user can convert from NO to NC, as required.
– Spring-return. Manually action facility.
QUANTITY: 1
3/2 NC convertible valve
– It will include a Basic timer, convertible from NC to NO.
– Timing range, 0 to 5s.
QUANTITY: 1
Air operated 5/2 single valve
– Spring-return pneumatic pilot valve.
– Manual operation facility.
QUANTITY: 1
Air operated 5/2 double valve
– Double piloting with memory function.
– Manual operation facility.
QUANTITY: 3
“OR” function
– It will include a single circuit selector with “OR” logic function.
QUANTITY: 1
Double “OR” valve
– It will include double circuit selector with logic function “OR”.
QUANTITY: 1
“AND” function
– It will include a single-simultaneous valve with an “AND” logic function.
QUANTITY: 1
Single direction speed controller (double)
– It will include two single direction speed controllers, operated manually.
QUANTITY: 2
Quick exhaust valve
– It will include a free exhaust valve with silencer.
QUANTITY: 1
Single acting cylinder
– Rod normally retracted.
– Stainless steel construction. Diameter: 20 mm. Stroke: 50 mm.
– Rubber cushion with built-in magnetic detection and rail.
QUANTITY: 1
Double acting cylinder with rubber cushion
– Stainless steel construction. Diameter: 20 mm. Stroke: 100 mm.
– Rubber cushion with built-in magnetic detection and rail.
QUANTITY: 2
20+20 m set of 4 mm blue/white flexible tube.
– Polyuretane tube, exterior diameter: 4mm, two-tone colour, for connections on pneumatic circuits.
QUANTITY: 1
Set of 10 tee fittings
– Set of 10 one-touch fittings for 4 mm tubes.
QUANTITY: 1
Set of 5 plugs, 1/8”
– It will include a 5-plug set for pressure outputs of 1/8”.
QUANTITY: 1
Set of 10×4 mm plastic plugs
– Tool for plugging pressure outlets in 4 mm tube.
QUANTITY: 1
Tube-cutter
– Tool for clean cuts, perpendicular to the length of the tube.
QUANTITY: 1
Boxes containing components
– It will include a box in Eurobox format allowing orderly storage of components.
– It will include heat-formed polystyrene trays for housing of components to ease their identification and control.
QUANTITY: 1
10 m set of 6 mm black flexible tube.
– Polyuretane tube, exterior diameter: 6mm, black, for connections between air cleaning unit and distribution block.
QUANTITY: 1
Tube-extractor
– Tool for an easy and quick extraction of the pipe (4 to 6 mm diameter).
QUANTITY: 1
Set of manuals and documentation
– Unit specifications.
– Operations manual.
– Technical dossiers for all components.
– Student dossiers with pneumatic electropneumatic activities proposed.
– Teacher`s dossiers with solutions for the activities provided for the student.
QUANTITY: 1
CD-ROM, Pneumatic slides
– It will include a set of slide in “Power Point” format organised into various chapters, which may be used as back-up for the teacher in the teaching-training process.
QUANTITY: 1
Industrial training that meets your needs!
The modular design of the SMC Pneutrainer-400 allows for hands-on training in basic pneumatics concepts and safety skills while also being able to teach more advanced topics all on the same platform.
- Air flow control and measurements
- How to operate, install, design, and troubleshoot pneumatic circuits
- Real-world technology training in Flow Control, Air Filters, Rotameters, Pressure Gauges, Air Motors, and Directional Control Valves
- Real-world skills development on industry-leading technologies
