Automotive Technology
Shop by ASE Category
Showing 13–24 of 87 results
-
Planetary Gear Set Trainer
The ConsuLab EM-1100 Planetary Gear Set Trainer is a simple planetary gear assembly that consists of 3 primary components: The ring gear (the outer most gear in black), 3 planet gears (green gears) that are housed by a carrier assembly (green circle) and a sun gear (the yellow gear in the center of the gear set). It allows the demonstration of the seven different gear ratios available with the planetary gear set.
-
Werk Wagon Portable Training Center
Toolkit is proud to offer schools and training facilities a completely customizable and mobile solution for workforce training, STEM education, CTE skills development with our new WERK WAGON portable training centers!
Completely customizable, modular and portable training in a whole new way. Our Werk Wagon is perfect for schools looking to bring their training and expertise into the community, or share resources between schools, or with physical space limitations that require larger bond and/or construction money. Toolkit’s Werk Wagons are mobile, portable Workforce Training Centers and simply amazing!
Customizable sizes, dimensions, and physical features allow these mobile training centers to fit perfectly to your needs and to focus on your needed training areas.
-
CAN Bus Multiplex Trainer
The ConsuLab MP-1918 is a CAN Bus Multiplex trainer that communicates in J-1939 protocol. Digital and analog inputs and outputs can be activated. Analog signals can be displayed using the J-1939 display. The trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. This unit is equipped with an integrated electronic fault box containing 12 faults.
The training aid includes a complete curriculum to make teaching CAN Bus as easy as possible.
The CAN Bus training system can be single-sided (-1S), double-sided (-1D), or used in combination with the ConsuLab Automotive Lighting System trainer.
-
CAN Bus Multiplex Trainer
The ConsuLab MP-1918-1D is a CAN Bus Multiplex trainer that communicates in J-1939 protocol. Digital and analog inputs and outputs can be activated. Analog signals can be displayed using the J-1939 display. The trainer utilizes the “Moduponent®” design feature which allows unlimited expansion capabilities. This unit is equipped with an integrated electronic fault box containing 12 faults.
The training aid includes a complete curriculum to make teaching CAN Bus as easy as possible.
The CAN Bus training system can be purchased as a single-sided (-1S) or double-sided (-1D) training system, or used in combination with the ConsuLab Automotive Lighting System trainer CL-MP-1918.
-
Multiplex Network Diagnostic Trainer
ConsuLab’s MP-750 is a totally functional vehicle CAN Bus trainer based on a Honda vehicle platform. It is a highly effective training system used for teaching the operation and concepts of Multiplex and CAN Bus systems in a highly accessible format for easy diagnosing and repair of CAN Bus circuits.
This is a full car CAN bus system trainer in a consolidated and approachable format.
-
SRS Restraints & Air Bag Diagnostic Trainer
The EM-300-07 SRS Restraints & Air Bag Diagnostic Trainer is designed to help instructors teach supplemental restraint systems and their interaction with the sensors and diagnostics. This information is shared on a CAN Bus network. This trainer may be used by instructors for ensuring student understanding of the basic system fundamentals and functionality. While the solid-propellant inflators are already detonated, the circuits function as normal in a fully live system providing the learner with real world hands on experience. An important feature is that EVERY SINGLE CONNECTOR has its own test points and a connector disconnect/connect switch that helps to enable the available 26 systems faults for real diagnosis without potential damaging of OEM connectors with repeated disconnect/connect cycles.
-
Suspension and Steering Trainer
The ConsuLab EM-130 Suspension and Steering trainer is designed to assist instructors in teaching basic alignment geometry and the function of a MacPherson strut suspension system with rack & pinion steering. The trainer is extremely versatile in that students can easily visualize all component operation as well as practice adjusting the various alignment angles. The trainer is equipped with two movable turntables and a magnetic alignment measuring gauge to assist students in observing actual measurement and changes in alignment angles. Students can also visualize and learn common braking system components.
-
Fuel Injection & Engine Management Trainer
The ConsuLab EM-330-1 Fuel Injection and Engine Management Trainer functions as in a real automobile, but uses non-flammable fluid instead of gasoline for safety and educational purposes. The trainer is used to teach and demonstrate engine management systems in a vehicle. The advantage to the trainer comes in the fact that it produces no exhaust, will fit through virtually any doorway, has adjustable inputs and is the actual system used on the vehicle.
-
Coil on Plug Ignition System Trainer
The ConsuLab EM-200-14 trainer allows for the demonstration of a complete ignition system with real-world components using COP technology. Terminal block receptacles are provided for diagnostic test points. A 12V source is required to operate the trainer.
-
Distributor Ignition System Trainer
The ConsuLab EM-200-12 Distributor Ignition System Trainer, is a training board used to teach the ignition system with distributor. The trainer is manufactured using brand new OEM components.
-
Four-Wheel Honda ABS Trainer with Faults
ConsuLab’s EM-122-HN02 Four-wheel Honda ABS trainer is used to demonstrate the functionality of the ABS braking system as it operates on a real vehicle. This automotive training aid includes mechanical faults in the friction components, which are designed to be diagnosed by students while performing a brake inspection.
This trainer also comes with six insertable, electronic faults, and is built with OEM components based on the 2006-2010 Honda Civic platform. The trainer can be used in the classroom environment for demonstrations to students.
The instructor can manually select which wheel combinations are desired to lockup prior to application of brake pedal. The trainer provides a safe and effective method of demonstrating the principles of braking systems used on today’s vehicles.
All routine brake service procedures can be performed on this trainer including component replacement, adjustments and hydraulic bleeding
-
Two-Wheel Hydraulic Brake Trainer (Non-ABS)
The Consulab Two Wheel Hydraulic Brake System Trainer EM-123-2_053251 is a 2-wheel hydraulic brake system trainer that is used to demonstrate the functionality of a typical non-ABS braking system as it operates on a real vehicle.
The trainer is built with OEM components and is based on the non-ABS Honda Civic platform. The trainer can be used in the classroom environment for demonstrations to students. The trainer provides a safe and effective method of demonstrating the principles of hydraulic braking systems used on today’s vehicles.
This brake trainer is made to order and comes complete with curriculum and student activity manuals.