Manufacturing
The need for skilled, qualified, and capable manufacturing workers across the globe, especially here in the US, is one that will continue to rise for the foreseeable future.
Toolkit Technologies is focused on bringing the needed technologies, curriculum, and digital solutions to schools across the country that will train the next generation of manufacturing professionals and leaders.
Our manufacturing training solutions range from integrated mechatronics systems to electrical, sensors, mechanical, fluid power, robotics and more.
Our goal is clear and consistent: to train the future leaders of industry on the leading technologies from industry.
Showing all 10 results
-
Electrical Troubleshooting System
We are excited to take your students’ and employees’ industrial troubleshooting skills to a whole new level with our Innotek Electrical Troubleshooting System, ETS-101.
The Electrical Troubleshooting System provides a hardware solution that introduces the fundamentals of troubleshooting electrical circuits in a sleek, portable, and approachable manner.
The unit is completely integrated into a portable suitcase allowing for easy transport. The unit provides circuits that are used in industrial applications, allowing participants to perform develop systematic troubleshooting skills.
Users can choose their electrical troubleshooting focus area and the circuit for students to troubleshoot.
-
Servo (Drives) Motion Training System
The Servo Motion Training System provides participants with hardware allowing for hands-on experiments in setup,
configuration and programming and servo drives for rotary or linear motion. The system gives access to onboard input and
output devices in addition to providing connectivity for external devices.
The system can be purchased with a Motion-Capable PLC or utilized in combination with an existing motion-capable PLC.
Tabletop or Suitcase Form Factor
- 120Vac Power Entry
- Emergency Stop
- (3) Selector Switches (Enable, + Over-Travel, – Over-Travel)
- (2) Homing Sensors
- (2) Servo Rotary Axis
- (2) Servo Drives
-
Pneumatic Troubleshooting Training System
Take your Pneumatics training to the next level with our new, hands-on Pneumatic Troubleshooting Training System.
The PNEU-TS-201 Training system provides participants with hardware allowing for hands-on activities in troubleshooting of industrial pneumatic applications. This system gives access to various electrical and pneumatic components which are connected to create six unique applications. The operator control section allows for direct manual and automatic control of each application. Lastly the system includes fault insertion capability to assist in development of a systematic approach to troubleshooting.
The Pneumatic Troubleshooting Training System is the most capable and comprehensive pneumatics training aid of its kind. Complete with Pick & Place, Loading Actuator, Rotary Manipulator, Free Wheeling Motor/Brake, Air Over Oil, and Operator Control Station.
-
PLC Automation Training System | all-in-one
The ATS-200 Automation Training System provides students with a hardware platform for performing hands-on skills development activities for automation technologies operations. The tabletop or mobile platform includes various applications which can be quickly connected to provide advanced activities, expanding the learning objectives beyond simple on/off functionality.
The all-in-one PLC Training System includes:
◉ Operator Control Application
◉ Sensors and Switches Application
◉ Pneumatic Actuator/Valve Application
◉ Linear Ball Screw Application
◉ BCD Thumbwheel and 7 Segment Display
◉ Dual Analog Potentiometer and Meters
◉ Motor Control Application
◉ Variable Speed Drive (Any Brand)
◉ PLC (Any Brand)
◉ HMI (Any Brand)
◉ PID Pressure Application
◉ PID Temperature Application
The system shown as tabletop trainer with banana jack connections. The unit can be purchased with a mobile frame with all components pre-wired to the PLC requiring no additional connections.
-
Tabletop Wiring Training System
The compact, tabletop EW-101 Electrical Wiring Training System allows for hands-on student lab activities in wiring residential, commercial/industrial, HVAC, and low-voltage systems (fire alarm, security system, etc) circuits.
The double-sided, hands-on training system gives students safe and approachable access to wire various circuits and devices commonly found in real world settings.
Customize your system by choosing your training focus (two per training system):
-
Lock-Out Tag-Out Training System
The Innotek Lockout-Tagout Training system provides learners with hardware allowing for demonstration and assessment of LOTO procedures. Lock-Out Tag-Out trainer puts students in the front seat of proper safety procedures in industrial workplaces.
According to the Occupational Safety and Health Administration (OSHA), lock-out/tag-out is one of the Top 10 “”Most Serious Violations”” and “”Most Often Cited Violations”” in industrial workplaces. LOTO must be taken seriously, as lives could be at stake. Workers maintaining equipment can be seriously injured from the unexpected energization of, release of stored energy from, or startup of equipment.
Proper Lock-Out Tag-Out procedures establish standards for the shutdown of equipment, so that energy sources can be isolated to prevent the release of potentially-hazardous energy during routine maintenance activities. Following proper LOTO procedures helps workers to avoid preventable workplace accidents and injuries.
The LOTO-101 training system is a functional system and operates a pump/tank circuit with various power sources and valves for multiple training scenarios. All required safety devices are included with the system for both electrical and mechanical devices.
-
Transformer Training System
We are proud to offer 2 different models of the Transformer Training System:
TRX-101: Fundamental Transformer Training System
TRX-201: Transformer Training System
Both Transformer Training System models provide participants with the necessary hardware for students to learn through hands-on experiments in transformer connections and operation.
-
Industrial Wiring Training System
The IW-201 Industrial Wiring Training System is a complete hands-on training solution for teaching the concepts of residential, commercial and industrial wiring in a compact and mobile classroom setting.
The Innotek Industrial Wiring Training System IW-201 allows students to study and practice electrical wiring skills like conduit bending, installing and wiring motor controls in a NEMA Electrical panel, terminating wires and choosing correct wire size, installing wiring into devices, and more!
The skills-based approach of the IW-200 is an invaluable tool for students studying/training to be electricians, industrial maintenance technicians, and/or advanced manufacturing operators, as it builds confidence through hands-on activities and competency-based exercises.
- Power Distribution, Wiring, and Devices
- Conduits and Enclosures
- Industrial Controls
-
Pumps Training System
The Pumps Training System provides a hardware solution for hands-on training and study in the topic area of pumps and pump characteristics. Students learn how to operate, install, maintain, troubleshoot, analyze performance, and select centrifugal pumps.
The PUMP-200 training system teaches skills related to commonly used pumps in industrial applications, such as centrifugal pumps, which are used in almost every industry to transfer non-hydraulic fluids of various types from one place to another.
-
Artificial Vision Training System
Toolkit’s VIS-101 Artificial Vision Training System provides a hardware training solution for introducing the fundamentals of artificial vision to students in mechatronics, automation, robotics, and industrial technology training programs.
The hands-on training system provides components that are used in common industrial applications, allowing participants to perform experiments in camera installation, electrical connections, and configuration of vision jobs via included software.
This Artificial Vision Training System will teach fundamental concepts around artificial vision cameras and technology and will then empower students to take their newly acquired skills to more complex tasks or apply to integrated systems.
