Automotive Technology
Explore Toolkit’s solutions for Automotive Technology Training Systems for modern automotive classrooms.
The ever-increasing quantity of technologies found in modern vehicles, combined with the ever-increasing complexity of electronic systems and state-of-the-art technologies such as Advanced Driver Assistance Systems (ADAS), Smart Sensors, Autonomous Driving systems, Interconnected Systems, Computerized Diagnostic and Scan Tools, Plug-In Electric Vehicle and Hybrid technologies, etc. creates an increased need for automotive training to be done with modern, state-of-the-art technologies and training systems.
Modern Automotive Training Labs should keep pace with modern automotive vehicles on the road.
Automotive service technicians and mechanics can be expected to:
- Identify problems, often by using computerized diagnostic equipment
- Plan work procedures, using charts, technical manuals, and experience
- Test parts and systems to ensure that they work properly
- Follow checklists to ensure that all critical parts are examined
- Perform basic care and maintenance, including changing oil, checking fluid levels, and rotating tires
- Repair or replace worn parts, such as brake pads, wheel bearings, and sensors
- Perform repairs to manufacturer and customer specifications
- Explain automotive problems and repairs to clients
Although service technicians work on traditional mechanical systems, such as engines, transmissions, and drivebelts, they also must be familiar with a growing number of electronic systems. Braking, transmission, and steering systems, for example, are controlled primarily by computers and electronic components.
Other integrated electronic systems, such as accident-avoidance sensors, are becoming common as well. In addition, a growing number of technicians are required to work on vehicles that use electricity or alternative fuels, such as ethanol.
Service technicians use many different tools, including computerized diagnostic tools and power tools such as pneumatic wrenches, lathes, welding torches, and jacks and hoists, in addition to common hand tools like wrenches, pliers, and sockets.
Whether for transportation and logistics classrooms, agriculture and mechanics or manufacturing classrooms, Toolkit has the Automotive Service Technology Training Systems and ASE Certification-aligned solutions to fit your area’s industry training needs.
Job Outlook: 69,000 new jobs per year
Average Pay: $46,890
Shop by ASE Category
Showing 1–12 of 22 results
-
Suspension and Steering Trainer
The ConsuLab EM-130 Suspension and Steering trainer is designed to assist instructors in teaching basic alignment geometry and the function of a MacPherson strut suspension system with rack & pinion steering. The trainer is extremely versatile in that students can easily visualize all component operation as well as practice adjusting the various alignment angles. The trainer is equipped with two movable turntables and a magnetic alignment measuring gauge to assist students in observing actual measurement and changes in alignment angles. Students can also visualize and learn common braking system components.
-
Fuel Injection & Engine Management Trainer
The ConsuLab EM-330-1 Fuel Injection and Engine Management Trainer functions as in a real automobile, but uses non-flammable fluid instead of gasoline for safety and educational purposes. The trainer is used to teach and demonstrate engine management systems in a vehicle. The advantage to the trainer comes in the fact that it produces no exhaust, will fit through virtually any doorway, has adjustable inputs and is the actual system used on the vehicle.
-
Power Seat System Trainer
The EM-200-05 trainer allows for the demonstration of a complete power seat system using real-world components. Terminal block receptacles are provided for diagnostic test points. Fault insertion included. The trainer requires a 12V power supply to operate.
-
Wiper & Washer System Trainer
The EM-200-06 trainer allows for the demonstration of a complete wiper and washer system using real-world components. Terminal block receptacles are provided for diagnostic test points. It includes the following:
- OEM Wiper motor
- Section of wiper transmission
- Washer fluid pump
- Wiper/washer switches
- Lockable fault box with 4 faults
- Test points for diagnosis
- Linkage enclosed in a clear plastic enclosure for safety
- Requires a 12VDC power supply to operate
-
Power Door Lock System Trainer – 4-Door GM
The EM-200-03D4C Four-door Power Door Lock System Trainer allows for the demonstration of a complete power window system using real world components. Terminal block receptacles are provided for diagnostic test points.
-
Blower Motor System Trainer
The ConsuLab EM-200-11 trainer allows for the demonstration of a complete blower motor system using real-world components. Terminal block receptacles are provided for diagnostic test points. The trainer requires a 12V power supply to operate.Included Components:
- HVAC control module.
- Blower motor.
- Blower motor resistor.
- Fault box with 4 faults.
- Test points for diagnosis.
-
Automotive Engine Trainer, Chevy Cruz 1.4L with Start/Stop + HVAC
The Engine Training Bench with Chevy Cruze 1.4-liter with Gasoline Direction Injection, Start/Stop technology, and A/C is ConsuLab’s first engine bench to ever have 2 pedals (brake and accelerator)!
It has two pedals so you can do stall tests and load the engine – you can perform a basic “road test” within your classroom going up to 20mph which allows STOP/START to function!
This automotive Engine Trainer also includes the new ConsuLink™ student learning platform that allows students and instructors to incorporate engine faults and case studies for immersive training in advanced drivability, diagnostics, engine performance and HVAC (air conditioning).
-
Automotive Engine Bench with Hyundai GDI 1.6L
The ConsuLab Engine Performance Trainer is an exciting new product that is designed for student-led learning on a real 2012-2017 Hyundai Accent 1.6L Gasoline Direct Injection Engine.
Experience the future of automotive engine training with the ConsuLab Automotive Engine Training System featuring the cutting-edge ConsuLink touchscreen interface. Our state-of-the-art system offers a hands-on learning experience like no other, empowering students and enthusiasts to explore the inner workings of engines with unprecedented ease and precision.
Students have access to case studies, operators manual, wiring diagrams, breakout boxes, schematics, videos and more right there on the engine.
-
GM Ecotec 2.2L Engine Trainer
The ConsuLab EM-140 engine performance trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2007 and newer GM ECOTEC 2.2L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5cm2) tubular steel equipped with four 5” phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
GM Cobalt or Pontiac G5 2.2L Ecotec Engine Trainer with HVAC
The ConsuLab EM-140 engine performance trainer with HVAC is a fully operational engine mounted on a mobile stand. Trainer is based on 2009-2010 and newer GM ECOTEC 2.2L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” tubular steel equipped with four 5” phenol casters (2-fixed and 2-swivel w/locks). Students can perform many ASE Education Foundation related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
GM Duramax Diesel Trucks Engine Bench 6.6L
The diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2011 GM Trucks (Chevrolet Silverado or GMC Sierra) w/Duramax 6.6L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
VW Diesel Engine Trainer with Fault Box
The diesel engine trainer is a fully operational engine mounted on a mobile stand. The trainer is based on 2010-2014 VW Jetta or Golf/Passat TDI 2.0L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.