A8 - Engine Performance

Read More...

Showing 1–12 of 13 results

  • Tesla Electric Vehicle Training System

    The ConsuLab EV-601-TS is a fully functioning Electric Vehicle Training System based on the Tesla Model 3 Platform. What better way to teach all things EVs than on the world’s leading electric vehicle manufacturer, Tesla.

    We are proud to release premier Electric Vehicle Training System available on the market today, the ConsuLab EV-601 iDEV Tesla Training Car. Featuring a functional Tesla Model 3 with OEM components and technologies.

    Have you ever wondered how to give your students hands-on exploration of a complete electrical vehicle in a safe environment? The EV-601-TS_053322 ALL EV iDEV training car by ConsuLab is not just a training aid, it’s an actual Tesla Model 3 training car visually displayed for maximum learning! All major components are identified in their actual location, most have been exposed (cutaway) in a way that is not possible on an operating vehicle, this helps attain a better understanding of their internal components and workings.

    Complete with practical training activities and curriculum!

  • Fuel Injection & Engine Management Trainer

    The ConsuLab EM-330-1 Fuel Injection and Engine Management Trainer functions as in a real automobile, but uses non-flammable fluid instead of gasoline for safety and educational purposes. The trainer is used to teach and demonstrate engine management systems in a vehicle. The advantage to the trainer comes in the fact that it produces no exhaust, will fit through virtually any doorway, has adjustable inputs and is the actual system used on the vehicle.

  • Coil on Plug Ignition System Trainer

    The ConsuLab EM-200-14 trainer allows for the demonstration of a complete ignition system with real-world components using COP technology. Terminal block receptacles are provided for diagnostic test points. A 12V source is required to operate the trainer.

  • Distributor Ignition System Trainer

    The ConsuLab EM-200-12 Distributor Ignition System Trainer, is a training board used to teach the ignition system with distributor. The trainer is manufactured using brand new OEM components.

  • Automotive Engine Trainer, Chevy Cruz 1.4L with Start/Stop + HVAC

    The Engine Training Bench with Chevy Cruze 1.4-liter with Gasoline Direction Injection, Start/Stop technology, and A/C is ConsuLab’s first engine bench to ever have 2 pedals (brake and accelerator)!

    It has two pedals so you can do stall tests and load the engine – you can perform a basic “road test” within your classroom going up to 20mph which allows STOP/START to function!

    This automotive Engine Trainer also includes the new ConsuLink™ student learning platform that allows students and instructors to incorporate engine faults and case studies for immersive training in advanced drivability, diagnostics, engine performance and HVAC (air conditioning).

  • Automotive Engine Bench with Hyundai GDI 1.6L

    The ConsuLab Engine Performance Trainer is an exciting new product that is designed for student-led learning on a real 2012-2017 Hyundai Accent 1.6L Gasoline Direct Injection Engine.

    Experience the future of automotive engine training with the ConsuLab Automotive Engine Training System featuring the cutting-edge ConsuLink touchscreen interface. Our state-of-the-art system offers a hands-on learning experience like no other, empowering students and enthusiasts to explore the inner workings of engines with unprecedented ease and precision.

    Students have access to case studies, operators manual, wiring diagrams, breakout boxes, schematics, videos and more right there on the engine.

  • Toyota Corolla 1.8L Engine Trainer with HVAC

    The ConsuLab EM-140C-TYO2 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2014-2018 Toyota Corolla 1.8L global vehicle platform. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information. Trainer is mounted on a mobile stand constructed of powder coated 2” square steel tubing equipped with four 5” phenol casters (2 fixed and 2 swivel w/locks) for easy transport. Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.

  • Honda Civic 1.8L Engine Trainer with Fault Box

    The ConsuLab EM-140C-HN01 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2012-2015 Honda Civic 1.8L global vehicle platform. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information. Trainer is mounted on a mobile stand constructed of powder coated 2” square steel tubing equipped with four 5” phenol casters (2 fixed and 2 swivel w/locks) for easy transport. Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.

  • GM Ecotec 2.2L Engine Trainer

    The ConsuLab EM-140 engine performance trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2007 and newer GM ECOTEC 2.2L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5cm2) tubular steel equipped with four 5” phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.

  • Toyota Yaris 1.5L Engine Trainer with Faults

    The ConsuLab EM-140C-TY01 engine trainer is a fully functional recycled engine mounted on a mobile stand. The trainer is based on a 2012-2018 Toyota Yaris 1.5L global vehicle platform. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information. Trainer is mounted on a mobile stand constructed of powder coated 2” square steel tubing equipped with four 5” phenol casters (2 fixed and 2 swivel w/locks) for easy transport. Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.

  • Ford Fusion 2.0L Engine Trainer with AC

    The ConsuLab EM-140C-FD04 is a fully functional recycled engine mounted on a mobile stand. The trainer has easy access for service procedures of all major components. Wire colors and connectors match OEM configuration and service information Many ASE Education Foundation tasks can be performed with this trainer pertaining to areas A6 (Electrical) & A8 (Engine Performance). Full protection safety guards are installed covering all rotating components.

  • GM Cobalt or Pontiac G5 2.2L Ecotec Engine Trainer with HVAC

    The ConsuLab EM-140 engine performance trainer with HVAC is a fully operational engine mounted on a mobile stand. Trainer is based on 2009-2010 and newer GM ECOTEC 2.2L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” tubular steel equipped with four 5” phenol casters (2-fixed and 2-swivel w/locks). Students can perform many ASE Education Foundation related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.