Automotive Technology
Shop by ASE Category
Showing 13–24 of 40 results
-
Alternator Trainer with PCM-Controlled Regulation
The EM-500-03 trainer allows instructors to demonstrate the operation of automotive charging systems controlled by a PCM. The synoptic diagram and the layout of all the control and instrumentation units provide clear and simple operation explanations to the user. The trainer is very reliable and equipped with all safety equipment required for demonstration. The EM-500-03 alternator trainer with a PCM controlled voltage regulator contains a variable speed drive that modulates alternator input (engine speed) as in an actual vehicle. The alternator has been modified to accommodate a load current of 25A in order to demonstrate the full load charging characteristic and allow the regulator to run at 100% capacity. This trainer can be used to help students understand the operation and common testing procedures of the charging system with PCM controlled regulation.
-
Power Seat System Trainer
The EM-200-05 trainer allows for the demonstration of a complete power seat system using real-world components. Terminal block receptacles are provided for diagnostic test points. Fault insertion included. The trainer requires a 12V power supply to operate.
-
Wiper & Washer System Trainer
The EM-200-06 trainer allows for the demonstration of a complete wiper and washer system using real-world components. Terminal block receptacles are provided for diagnostic test points. It includes the following:
- OEM Wiper motor
- Section of wiper transmission
- Washer fluid pump
- Wiper/washer switches
- Lockable fault box with 4 faults
- Test points for diagnosis
- Linkage enclosed in a clear plastic enclosure for safety
- Requires a 12VDC power supply to operate
-
Power Door Lock System Trainer – 4-Door GM
The EM-200-03D4C Four-door Power Door Lock System Trainer allows for the demonstration of a complete power window system using real world components. Terminal block receptacles are provided for diagnostic test points.
-
Blower Motor System Trainer
The ConsuLab EM-200-11 trainer allows for the demonstration of a complete blower motor system using real-world components. Terminal block receptacles are provided for diagnostic test points. The trainer requires a 12V power supply to operate.Included Components:
- HVAC control module.
- Blower motor.
- Blower motor resistor.
- Fault box with 4 faults.
- Test points for diagnosis.
-
Functional Cutaway Diesel Starter
The ConsuLab EC-510HV Functional Cutaway Diesel Starter demonstrates the internal operation of a heavy duty diesel starter and permits the student to visualize and safely operate the system.
-
Cutaway Eaton Transmission Trainer
The EC-1108 cutaway Eaton transmission has been designed for teaching Eaton heavy-duty transmission theory and operation. This model provides several forward speeds and reverses, consisting of a front section and an auxiliary section.
The auxiliary section contains LO and HI range ratios, and the L and H splitter gear ratios. When in HI range, the gear ratios can be split by using the splitter control button. This model is driven by hand crank.
-
Cutaway Allison Transmission – 3000 SERIES
The ConsuLab EC-1106-03 cutaway Allison transmission has been specifically designed for teaching heavy duty automatic transmission theory and operation. It has been strategically sectioned and cutaway to allow students to visualize the internal transmission functions.
The Allison 3000 series is a fully automatic torque converter driven, electronically controlled 6-speed automatic transmission that is commonly used in coaches and heavy vehicles.
The other Allison Series are available on request.
-
Cutaway Allison Transmission – 1000 SERIES
The ConsuLab EC-1106-01 cutaway Allison transmission has been specifically designed for teaching heavy duty automatic transmission theory and operation. It has been strategically sectioned and cutaway to allow students to visualize the internal transmission functions. The Allison 1000 series is a fully automatic torque converter driven, electronically controlled 5-speed automatic transmission that is commonly used in trucks and light vehicles.
-
Driveability Electronics Automotive Electrical Trainer
The MD-4000 Modular automotive electrical and electronics trainer is versatile and adaptable to meet many program’s electrical/electronic training needs. In order to help customers know what this trainer can do, ConsuLab has created kits for the following:
- Advanced Electronics (MD-4000-22)
- Drivability Electronics (MD-4000-23)
- HVAC Electronics (MD-4000-24)
In addition, add-on or expansion kits are available for each of these so schools can easily expand and adapt their kits to cover additional topics.
-
Evap Systems Trainer
The ConsuLab EM-200-22 EVAP System trainer is designed as a functional evaporative emissions system based on a Chevrolet Cobalt platform. Perfect for automotive classrooms, the Evap System Trainer is designed to teach students automotive fundamentals in an immersive and intuitive way.
It can be used to teach the operational functions of a typical evaporative emission system. It also has the capability of demonstrating the cause and effect of having a small and/or large system leak. Students are able to visualize the components of the system and can hookup test equipment to learn how system leaks will affect performance.
The fuel tank contains an internal lamp heater for demonstration of internal pressure changes. Requires a 12 VDC power supply to operate, and includes a complete curriculum and student activities.
-
Cutaway Battery
The ConsuLab EC-520 Cutaway Battery is the ideal aid for teaching battery principles and allows visualization of the inner parts. Designed to work in lawn mowers, lawn and garden tractors, small tractors, loaders, backhoes, 4-wheelers, generators, and motorcycles. No electrolyte for educational purposes.
