Automotive Technology
Shop by ASE Category
Showing 13–24 of 39 results
-
Power Seat System Trainer
The EM-200-05 trainer allows for the demonstration of a complete power seat system using real-world components. Terminal block receptacles are provided for diagnostic test points. Fault insertion included. The trainer requires a 12V power supply to operate.
-
Wiper & Washer System Trainer
The EM-200-06 trainer allows for the demonstration of a complete wiper and washer system using real-world components. Terminal block receptacles are provided for diagnostic test points. It includes the following:
- OEM Wiper motor
- Section of wiper transmission
- Washer fluid pump
- Wiper/washer switches
- Lockable fault box with 4 faults
- Test points for diagnosis
- Linkage enclosed in a clear plastic enclosure for safety
- Requires a 12VDC power supply to operate
-
Power Door Lock System Trainer – 4-Door GM
The EM-200-03D4C Four-door Power Door Lock System Trainer allows for the demonstration of a complete power window system using real world components. Terminal block receptacles are provided for diagnostic test points.
-
Blower Motor System Trainer
The ConsuLab EM-200-11 trainer allows for the demonstration of a complete blower motor system using real-world components. Terminal block receptacles are provided for diagnostic test points. The trainer requires a 12V power supply to operate.Included Components:
- HVAC control module.
- Blower motor.
- Blower motor resistor.
- Fault box with 4 faults.
- Test points for diagnosis.
-
Functional Cutaway Diesel Starter
The ConsuLab EC-510HV Functional Cutaway Diesel Starter demonstrates the internal operation of a heavy duty diesel starter and permits the student to visualize and safely operate the system.
-
GM Duramax Diesel Trucks Engine Bench 6.6L
The diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2011 GM Trucks (Chevrolet Silverado or GMC Sierra) w/Duramax 6.6L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
F-Series Ford Diesel Truck Engine Bench
The EM-140D diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2011 Ford Pickup F Series w/ POWERSTROKE 6.7L, 8-cylinder diesel engine platform. Trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
Ram / Cummins Diesel Engine Bench 6.7L
The diesel engine trainer is a fully operational engine mounted on a mobile stand. Trainer is based on 2016-2013 Ram Trucks w/Cummins 6.7L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. The trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
VW Diesel Engine Trainer with Fault Box
The diesel engine trainer is a fully operational engine mounted on a mobile stand. The trainer is based on 2010-2014 VW Jetta or Golf/Passat TDI 2.0L global engine platform. The trainer is easy to work on and all major components, wiring and connectors match OEM configuration. Trainer is mounted on a mobile stand constructed of 2” (5 cm) tubular steel equipped with four 5” (12.5 cm) phenol casters (2-fixed and 2-swivel w/locks). Students can perform many NATEF related Engine Performance and Electrical/Electronic tasks using this trainer. Trainer is equipped with safety guards covering all rotating components.
-
Driveability Electronics Automotive Electrical Trainer
The MD-4000 Modular automotive electrical and electronics trainer is versatile and adaptable to meet many program’s electrical/electronic training needs. In order to help customers know what this trainer can do, ConsuLab has created kits for the following:
- Advanced Electronics (MD-4000-22)
- Drivability Electronics (MD-4000-23)
- HVAC Electronics (MD-4000-24)
In addition, add-on or expansion kits are available for each of these so schools can easily expand and adapt their kits to cover additional topics.
-
Evap Systems Trainer
The ConsuLab EM-200-22 EVAP System trainer is designed as a functional evaporative emissions system based on a Chevrolet Cobalt platform. Perfect for automotive classrooms, the Evap System Trainer is designed to teach students automotive fundamentals in an immersive and intuitive way.
It can be used to teach the operational functions of a typical evaporative emission system. It also has the capability of demonstrating the cause and effect of having a small and/or large system leak. Students are able to visualize the components of the system and can hookup test equipment to learn how system leaks will affect performance.
The fuel tank contains an internal lamp heater for demonstration of internal pressure changes. Requires a 12 VDC power supply to operate, and includes a complete curriculum and student activities.
-
Cutaway Diesel Exhaust After-Treatment System
The ConsuLab EC-490 Cutaway Diesel Exhaust System Trainer allows students to view the components of a diesel exhaust aftertreatment system using LED’s and electronic controls to help learners understand the function, and effect on, diesel engine exhaust gases following the combustion cycle.
The trainer uses multiple colored LED’s to represent the gases that flow in the exhaust system and, demonstrates the chemical reactions within each of the aftertreatment processes.
