Automotive Technology
Shop by ASE Category
Showing 13–24 of 36 results
-
4-Wheel Hydraulic Brake Trainer with Disc and Drum + Faults
The ConsuLab EM-123-4HN02 Disc & Drum Brake Trainer with Faults is used to demonstrate the functionality of a modern automotive hydraulic braking system as it functions on vehicle.
The inclusion of four permanent, mechanical, real-world faults captures students attention and proves their learning. The product is built using recycled OEM components for the platform and all wear items are brand new (discs, pads, drums, shoes, etc.).
The EM-123-4HN02 Disc and Drum Brake training aid has an extremely small footprint and can fit into any classroom, even your office for robust automotive training anywhere! It fits through a 30″ door.
All routine brake service procedures can be performed on this trainer including:
• Master cylinder service
• Brake pad/shoe replacement
• Disc/Drum service
• Wheel bearing service
• Caliper/Wheel cylinder service
• Brake hose/line service
• Parking brake service -
Relay Lab Kits Pro
This hands-on learning tool from Switch Labs is designed to teach the functions and wiring of relays, switches, and lights while preparing students to wire up the dash on a Switch EV Kit Car. Includes 5 – 100-foot spools of wire, ferrule connectors, instructions, schematic and testing procedure.
-
Alternator Trainer with PCM-Controlled Regulation
The EM-500-03 trainer allows instructors to demonstrate the operation of automotive charging systems controlled by a PCM. The synoptic diagram and the layout of all the control and instrumentation units provide clear and simple operation explanations to the user. The trainer is very reliable and equipped with all safety equipment required for demonstration. The EM-500-03 alternator trainer with a PCM controlled voltage regulator contains a variable speed drive that modulates alternator input (engine speed) as in an actual vehicle. The alternator has been modified to accommodate a load current of 25A in order to demonstrate the full load charging characteristic and allow the regulator to run at 100% capacity. This trainer can be used to help students understand the operation and common testing procedures of the charging system with PCM controlled regulation.
-
Power Seat System Trainer
The EM-200-05 trainer allows for the demonstration of a complete power seat system using real-world components. Terminal block receptacles are provided for diagnostic test points. Fault insertion included. The trainer requires a 12V power supply to operate.
-
Wiper & Washer System Trainer
The EM-200-06 trainer allows for the demonstration of a complete wiper and washer system using real-world components. Terminal block receptacles are provided for diagnostic test points. It includes the following:
- OEM Wiper motor
- Section of wiper transmission
- Washer fluid pump
- Wiper/washer switches
- Lockable fault box with 4 faults
- Test points for diagnosis
- Linkage enclosed in a clear plastic enclosure for safety
- Requires a 12VDC power supply to operate
-
Power Door Lock System Trainer – 4-Door GM
The EM-200-03D4C Four-door Power Door Lock System Trainer allows for the demonstration of a complete power window system using real world components. Terminal block receptacles are provided for diagnostic test points.
-
Blower Motor System Trainer
The ConsuLab EM-200-11 trainer allows for the demonstration of a complete blower motor system using real-world components. Terminal block receptacles are provided for diagnostic test points. The trainer requires a 12V power supply to operate.Included Components:
- HVAC control module.
- Blower motor.
- Blower motor resistor.
- Fault box with 4 faults.
- Test points for diagnosis.
-
Functional Cutaway Diesel Starter
The ConsuLab EC-510HV Functional Cutaway Diesel Starter demonstrates the internal operation of a heavy duty diesel starter and permits the student to visualize and safely operate the system.
-
Driveability Electronics Automotive Electrical Trainer
The MD-4000 Modular automotive electrical and electronics trainer is versatile and adaptable to meet many program’s electrical/electronic training needs. In order to help customers know what this trainer can do, ConsuLab has created kits for the following:
- Advanced Electronics (MD-4000-22)
- Drivability Electronics (MD-4000-23)
- HVAC Electronics (MD-4000-24)
In addition, add-on or expansion kits are available for each of these so schools can easily expand and adapt their kits to cover additional topics.
-
Evap Systems Trainer
The ConsuLab EM-200-22 EVAP System trainer is designed as a functional evaporative emissions system based on a Chevrolet Cobalt platform. Perfect for automotive classrooms, the Evap System Trainer is designed to teach students automotive fundamentals in an immersive and intuitive way.
It can be used to teach the operational functions of a typical evaporative emission system. It also has the capability of demonstrating the cause and effect of having a small and/or large system leak. Students are able to visualize the components of the system and can hookup test equipment to learn how system leaks will affect performance.
The fuel tank contains an internal lamp heater for demonstration of internal pressure changes. Requires a 12 VDC power supply to operate, and includes a complete curriculum and student activities.
-
Cutaway Active Brake Booster and Master Cylinder
The ConsuLab EC-122 cutaway allows to visually demonstrate the operation and internal parts of a vacuum brake booster and master cylinder. The trainer is equipped with a braking handle that simulates the brake pedal for educational purposes. On a vehicle when the driver depresses the brake pedal, the movement is transformed into hydraulic pressure that is delivered to hydraulic cylinders at the four wheels through pipes and hoses using an incompressible fluid.
-
Cutaway 30/30 Air Brake Chamber
The EC-127 Cutaway 30/30 Air Brake Chamber is partly cut away so that a trainee can observe the internal elements housed within the chamber.
Made to Order.
