0
X
  • No products in the list

(512) 203-0590

Model #SAI7299B

SMC Tabletop Automation Training Modules with PLC

SMC Tabletop automation trainers with Micro800 PLCs

SMC ATM-200 with AB PLC

Automation Training Stacking Station

SMC ATM-200 Material Stacking Trainer

Tabletop Conveyor Automation Trainer

SMC ATM-200 Conveyor Station

Tabletop mechatronics automation trainer, material handling

SMC ATM-200 Material Handling

autoSIM: ATM-201

autoSIM: ATM-201

autoSIM: ATM-202

autoSIM: ATM-202

autoSIM: ATM-203

autoSIM: ATM-203

SMC Tabletop automation trainers with Micro800 PLCs
Automation Training Stacking Station
Tabletop Conveyor Automation Trainer
Tabletop mechatronics automation trainer, material handling
autoSIM: ATM-201
autoSIM: ATM-202
autoSIM: ATM-203

New Training Product for engineering, automation and mechatronics classrooms!

Unlock the potential of your engineering, automation, and mechatronics classrooms with our cutting-edge SMC ATM-200 training system, now featuring Allen Bradley PLCs.

What sets the SMC ATM-200 apart is its versatility and functionality. Comprising three tabletop training aids, each equipped with a state-of-the-art data acquisition module, students gain practical experience in control and simulation using SMC’s autoSIM-200 software. But that’s not all – with an integrated Allen Bradley Micro800 PLC, learners can seamlessly transition to industrial programming using Rockwell Automation’s Connected Components Workbench.

With the SMC ATM-200, students delve deep into fundamental logic and control principles through autoSIM-200 before harnessing the full potential of an industrial processor with the PLC. From mastering electricity and pneumatics to honing programming skills and understanding sensor technologies, our training system offers a comprehensive curriculum that prepares students for real-world challenges in the manufacturing sector.

Each training module includes three tabletop training stations and a site license to access the autoSIM simulation software. This allows for virtual training in essential areas such as pneumatics, electrical circuits, hydraulics, and control systems, ensuring that every student has the tools they need to succeed.

Empower your students with the skills and knowledge they need to thrive in today’s competitive job market. Invest in the SMC ATM-200 and watch as your classroom becomes a hub of innovation, creativity, and hands-on learning in the exciting world of manufacturing.

Pricing upon request

Add to quote list

Description

SMC’s ATM-200 is a set of 3 separate training station, fully assembled, built entirely of industrial components.

The set includes a 3D application of each station to simulate and control them from autoSIM-200 environment.

The 3 stations are supplied fully assembled in a tabletop anodized aluminum structure:

  1. Stacking Magazine Station,
  2. Pneumatic Handling Station,
  3. Conveyor Station

Each station inputs and outputs are connected to an interface for their control using simulation software on a PC.

  • All the stations include autoSIM-200 simulation software (1 license each).
  • All the stations include the 3D application for simulate and control the station from autoSIM-200 environment (1 license each).
  • Simulate, control and supervise actual automated processes from a virtual environment.
  • Include 3D models from the real process.
  • Compatible with automation application simulator software autoSIM-200.
  • Access to the virtual PLC programming editor integrated in autoSIM-200.
  • Access to the table of symbols from the virtual PLC.
  • Access to the libraries and to the simulation panel for components in pneumatics, electro-pneumatics, hydraulics, electro-hydraulics and electrics.
  • Independent window with 3D model.

ATM-201: Stacking Station

This first station feeds the piece and verifies its orientation. This operation begins when the start pushbutton of the control and simulation application is pressed.

This module has the following components and characteristics:

Actuators:

  • Horizontal axis: pneumatic cylinder Ø10, stroke: 40 mm, with flow regulators and initial-end position detectors. Controlled by 5/2 way monostable solenoid valve.
  • Vertical axis: compact guide pneumatic cylinder Ø10, stroke: 40 mm, with flow regulators and initial-end position detectors. Controlled by 5/2 way monostable solenoid valve.

Sensors:

  • Reed type magnetic detectors (D-A93L).

Electrical control panel:

  • Accessible connection terminals (coded) for power and inputs/outputs.
  • I/O station: 4 inputs, 3 outputs.
  • Power supply: 24V/26.4W.
  • Inputs/outputs interface: data acquisition board for 8 inputs/ 8 outputs with USB connection for PC compatible with autoSIM-200 software (SAI2443).

Software and simulation:

  • AutoSIM-200 software (1 license).
  • Application for 3D simulation and control of the station from autoSIM-200 environment. (1 license).

ATM-202: Conveyor Station

This second station moves the pieces thanks to a motorized belt and classifies the pieces thanks to a set of detectors. This operation begins when the start pushbutton of the control and simulation application is pressed.

This module has the following components and characteristics:

Actuators:

  •  DC motor, nominal data: 24 V, 7.4 W and 1 Nm torque.
  •  DC solenoid, nominal data: 24 V, 10 W and 27 mm stroke.

Sensors:

  •  Fiber-optic sensor and amplifier.
  •  Inductive sensor.

Electrical control panel: 

  • Accessible connection terminals (coded) for power and inputs/outputs.
  • I/O station: 2 inputs, 2 outputs.
  • 2 relays
  • Power supply: 24V/26.4W.
  • Inputs/outputs interface: data acquisition board for 8 inputs/ 8 outputs with
  • USB connection for PC compatible with autoSIM-200 software (SAI2443).

Software and simulation:

  • AutoSIM-200 software (1 license).
  • Application for 3D simulation and control of the station from autoSIM-200 environment. (1 license).

ATM-203: Handling Station

The operation carried out by the third station consists of picking the piece from the initial position (feed position) and placing it on the final position, for this a cartesian manipulator with gripper is used. The piece-manipulation operation requires that there is a piece in the initial position, previously positioned by the user. This operation begins when the start pushbutton of the control and simulation application is pressed.

This module has the following components and characteristics:

Actuators:

  • Horizontal axis: compact guide pneumatic cylinder Ø16, stroke: 50 mm, with flow regulators and initial-end position detectors. Controlled by 5/2 way monostable solenoid valve.
  • Vertical axis: compact guide pneumatic cylinder Ø12, stroke: 30 mm, with flow regulators and initial-end position detectors. Controlled by 5/2 way monostable solenoid valve.
  • Holding system: Two-finger parallel opening gripper, with miniature fittings. Controlled by 5/2 way monostable solenoid valve.

Sensors:

  • Reed type magnetic detectors (D-A93L).

Electrical control panel:

  • Accessible connection terminals (coded) for power and inputs/outputs.
  • I/O station: 4 inputs, 3 outputs.
  • Power supply: 24V/26.4W.
  • Inputs/outputs interface: data acquisition board for 8 inputs/ 8 outputs with USB connection for PC compatible with autoSIM-200 software (SAI2443).

Software and simulation:

  • AutoSIM-200 software (1 license).
  • Application for 3D simulation and control of the station from autoSIM-200 environment. (1 license).

Relevant Subjects

  • Manufacturing
  • Mechatronics
  • Sensors
  • STEM

Designed for:

  • High School
  • Technical College

Additional information

Manufacturer

,

Features

Compact, Portable, Industrial-Relevance, Step-by-Step Curriculum, Introductory

Product Documents

SMC-ATM-200

The ATM-200 includes SMC’s industrial simulation software, autoSIM-200, for creating pneumatics, electrical, and hydraulics circuits, along with Grafcet programming capabilities.

autoSIM-200

smc transparent logo white copy
SMC Automation Corporation
From industry to education

A Global Manufacturing Leader

The World's Largest Manufacturer of Automation and Pneumatic Control Technologies for industrial companies brings its industrial know-how and innovation to technical training programs.

Every SMC training system features all industrial components commonly found in manufacturing settings across the globe, including SMC's industry-leading Directional Control equipment, Actuators, modular Filters, Regulators, and Lubricators, Air Preparation equipment, Fittings and Tubings, Flow Control equipment, Solenoid Valves, Digital Pressure Switches, and Electric equipment.

The equipment and technologies students train on in the classroom, are the very same equipment and technologies they will see and use in their future workplace(s).

smc cert badges
SMC Skills Gap

Our SMC Training Systems are designed around SKILLS.

The skills needed by students, technicians, and engineers to be successful in industry today;

The skills for a changing workforce and rapidly evolving industrial future; and,

The skills to create the future leaders of industry.

SMC Training Systems are focused on critical thinking skills and technical mastery of technologies and concepts - our goal is NOT to train students on how to follow instructions; but rather how to empower oneself with the tools (technical aptitude) to be successful in the career of their choosing.

TECHNOLOGY TRAINERS
TECHNOLOGY TRAINERS

SMC's Technology Trainers are built upon the principle that a solid foundation is paramount to creating students with technical expertise in their field, regardless of how advanced it may be.

SMC Technology Trainers are best-in-class modular training platforms that are complete with step-by-step curriculum and user manuals, simulation tools, and engaging digital solutions to further expand student understanding.

  • Basic Electrical Trainers - AC, DC, and Solid State
  • Pneumatics and Electro-Pneumatics
  • Hydraulics and Electro-Hydraulics
  • Mechanical Drives
  • Programmable Logic Controllers and Human Machine Interfaces
  • Industrial Robotics
  • Industrial (Motor) Controls
  • Process Control
  • Sensors and Smart Sensors
  • Vacuum Technology
MECHATRONICS SYSTEMS
INDUSTRY 4.0 SYSTEMS
CUSTOM TRAINING SYSTEMS

Award Winning Simulation Software - autoSIM-200

SMC's autoSIM-200 software is the best turn-key software package for designing, viewing, simulating, monitoring and controlling Pneumatic, Hydraulic, Electrical, and Electronic Circuits.

autoSIM-200 is a one-for-one complement of SMC's hands-on training systems, allowing students to train by wiring circuits and programming systems virtually before applying them to the physical system.

The 2D and 3D packages allow for students to complete actual lab activities and curriculum exercises in the virtual simulator before completing them on the hands-on training equipment.

Comprehensive eLearning

Our engaging and interactive, web-based eLearning represents a major achievement of providing students "hands-on" training access in a virtual environment.

All major areas of Automation are taught in easy-to-digest bite-sized nuggets broken up into different topics such as Alternating Currents, Direct Currents, Solid State Devices, Pneumatics, Hydraulics, Robotics, PLCs, Sensors, Process Control and More!

Looking for Soft Skills eLearning, Trades-focused eLearning, Measurement, Tools, etc? Just Ask!

Some of our SMC Partners...

Toyota-Logo (1)
tyson foods
yeti logo
Occidental-Petroleum-Logo.svg
tesla logo
Schlumberger logo
NXP-Logo.svg
lockheed martin logo
intel logo
applied material logo
dell logo
Abbott_Laboratories_logo.svg

THE SMC DIFFERENCE

COMPLETE CURRICULUM

All SMC International Training products are complete with all learning materials for successful implementation in the classroom and/or lab. All training systems include user manuals, activity guides, and access to wiring, electrical, and mechanical schematics, in addition to complete PLC programs and diagrams.

SMC curriculum is designed to meet you at your level, with as much hand-holding as necessary, and take you to our standard: industry.

Industry Driven

All SMC Training Systems are made up entirely of industrial components and systems.

As the global leader in such technologies, it is likely that the components your students use on our training systems will in fact be the same technologies and components they see when they enter the workforce.

Our reference is industry.

From Industry. For Industry.

GET CERTIFIED

SMC Training Systems and associated Curriculum are designed to be aligned with most industry-recognized credentials, including SMC's Industry 4.0 Specialist Certification Pathway, and all associated micro-credentials.

Our Skills-Driven approach to technical training means each course can be cross-walked and aligned with industry-validated micro-credentials.

Related products