em130

em130

em130ima11 (1)

em130ima11 (1)

em130ima8 (1) (1)

em130ima8 (1) (1)

em130ima5 (2) (1)

em130ima5 (2) (1)

em130ima7 (1) (1)

em130ima7 (1) (1)

Model #EM-130_052793

Suspension and Steering Trainer

The ConsuLab EM-130 Suspension and Steering trainer is designed to assist instructors in teaching basic alignment geometry and the function of a MacPherson strut suspension system with rack & pinion steering. The trainer is extremely versatile in that students can easily visualize all component operation as well as practice adjusting the various alignment angles. The trainer is equipped with two movable turntables and a magnetic alignment measuring gauge to assist students in observing actual measurement and changes in alignment angles. Students can also visualize and learn common braking system components.

Pricing upon request

Product Documents

Suspension and Steering Trainer

Description

The trainer is extremely versatile in that students can easily visualize all component operation as well as practice adjusting the various alignment angles. The trainer is equipped with two movable turntables and a magnetic alignment measuring gauge to assist students in observing actual measurement and changes in alignment angles. Students can also visualize and learn common braking system components. The EM-130 trainer consists of a typical front wheel drive vehicle having MacPherson strut suspension, rack & pinion steering and front disc brakes. The components necessary for correct operation and service of alignment angle adjustments and component identification are included. The potential danger of the MacPherson spring pressures have been eliminated by replacing the stock coil spring with a custom plastic coil spring that does not support any of the weight of the suspension system. The lower control arm and support bushings are OEM.

The sway bar has been designed with a quick disconnect feature that allows students to disconnect it for easy and precise alignment adjustment procedures. The rack and pinion steering linkage is connected to a steering wheel identical to actual vehicle configuration. The tie-rod ends are equipped with typical adjustment methods for the adjustment of toe specifications. The trainers frame has three manual adjustment features that allow students to create abnormal vehicle conditions such as uneven front or rear loading, worn springs, etc. The trainer also features adjustment plates at the top of both MacPherson strut assemblies which allow easy adjustment of caster and camber. The tires sit on movable plates for ease of movement during adjustments. The trainer can also be used for student learning of front wheel bearing and hub construction as well as the disc brake system. Based on a 2012-2018 Hyundai Accent.

 

Educational Advantages

  • Accomplish 14 of the NATEF-required MLR tasks using the EM-130 steering and suspension training aid.
  • Doesn’t require electricity, air or hydraulics and you are able to do it in a classroom without needing to have a vehicle on a rack.
  • See a full range of motion of all suspension components at any angle.
  • Visually identify components of a MacPherson strut suspension system and rack & pinion system.
  • Students can perform changes, measure and observe results to caster, camber and toe.
  • Unit comes with a sway and stabilizer bar that can easily be disconnected for routine service.

 

NATEF TASKS FOR THE EM-130 SUSPENSION AND STEERING TRAINER

MLR –  MAINTENANCE & LIGHT REPAIR

MANUAL DRIVE TRAIN & AXLES

III-D-1   Inspect, remove, and replace front wheel drive (FWD) bearings, hubs, and seals. P-2

STEERING & SUSPENSION

IV-B-1      Inspect rack and pinion steering gear inner tie rod ends (sockets) and bellows boots. P-1
IV-B-8      Inspect tie rod ends (sockets), tie rod sleeves, and clamps. P-1
IV-B-15    Inspect and replace front stabilizer bar (sway bar) bushings, brackets, and links. P-1
IV-B-16   Inspect strut cartridge or assembly. P-1
IV-B-17   Inspect front strut bearing and mount. P-1
IV-C-1     Perform pre-alignment inspection and measure vehicle ride height; determine necessary action. P-1
IV-D-1     Inspect tire condition; identify tire wear patterns; check for correct size and application (load and   speed ratings) and adjust air pressure; determine necessary action. P-1
IV-D-2     Rotate tires according to manufacturer’s recommendations. P-1
IV-D-5     Inspect tire and wheel assembly for air loss; perform necessary action. P-1

BRAKES

V-A- 3     Install wheel and torque lug nuts. P-1
V-D-1      Remove and clean caliper assembly; inspect for leaks and damage/wear to caliper housing; determine necessary action. P-1
V-D-2     Clean and inspect caliper mounting and slides/pins for proper operation, wear, and damage; determine necessary action. P-1
V-D-3     Remove, inspect, and replace pads and retaining hardware; determine necessary action. P-1
V-D-4     Lubricate and reinstall caliper, pads, and related hardware; seat pads and inspect for leaks. P-1
V-D-5     Clean and inspect rotor, measure rotor thickness, thickness variation, and lateral runout; determine   necessary action. P-1
V-D-6     Remove and reinstall rotor. P-1

AST – AUTOMOTIVE SERVICE TECHNICIAN

ALL OF THE TASKS ABOVE FROM MLR PLUS THE FOLLOWING:

STEERING & SUSPENSION

IV-B-7   Remove and replace rack and pinion steering gear; inspect mounting bushings and brackets. P-2
IV-B-8   Inspect rack and pinion steering gear inner tie rod ends (sockets) and bellows boots; replace as needed.   P-2
IV-C-2   Diagnose strut suspension system noises, body sway, and uneven ride height concerns; determine necessary action. P-1
IV-C-6   Inspect, remove and install steering knuckle assemblies. P-3
IV-C-9   Inspect, remove and install front stabilizer bar (sway bar) bushings, brackets, and links. P-3
IV-C-10 Inspect, remove and install strut cartridge or assembly, strut coil spring, insulators (silencers), and upper strut bearing mount. P-3

IV-E-1   Diagnose vehicle wander, drift, pull, hard steering, bump steer, memory steer, torque steer, and  steering return concerns; determine necessary action. P-1

Learning Topics

  • A4 - Suspension & Steering
  • Automotive Technology

Grade/Skill Level

Designed for:

  • High School
  • Industry
  • K-8
  • Technical College
  • University

Additional information

Manufacturer

,

Features

Automotive I Diesel I Hands-On Training I Suspension and Steering Training I MacPherson Strut Suspension I Rack & Pinion Steering

ASE Categories

A4

Consulab_Logo_White copy

A Leader In

Automotive

Hydraulics & Pneumatics

Trucks & Heavy Equipment

Electrical

OEM Training Tools Driven by Experience

All ConsuLab products begin as OEM components found in industry. Our team of experts adapt them for educational purposes by making them safer, more visible, and more classroom/training friendly. This includes adding troubleshooting fault boxes where possible so students are learning important diagnostic skills from the very beginning.

This philosophy helps students rapidly develop exceptional critical thinking skills, troubleshooting skills, and industry relevant automotive knowledge for their future careers.

ConsuLab is a proud supporter of SkillsUSA and WorldSKILLS.

A Lot Has Changed in Modern Vehicles

And our team of education specialists and engineers approach every training aid with the goal of preparing students for their careers - now and in the future. We ensure each product represents the latest in automotive and heavy vehicle technology.

From the latest in smart sensors technologies, to ADAS, networking, and scan tools, ConsuLab training systems are designed and built for your students to be prepared for the modern workforce.

Experience, Realized

For more than 40 years, ConsuLab has been a manufacturer of high quality, innovative training equipment for vocational and technical training institutions, in addition to various industry companies. Today, ConsuLab is a world leader in this area.

Our Education Team brings over 200 years of experience in the classroom and in their own shops to help (new and seasoned) educators effectively teach modern students in modern classrooms.

auto-teaching_crop

Consulab Trainers

Our ConsuLab Training Aids segment Transportation Technology Systems into easy-to-digest training areas for students to learn complete and holistic concepts - from fundamentals to advanced. Our training systems are best-in-class, and can be conceptualized by the following form factors:

These classroom tools are great for illustrating and demonstrating complex and hard-to-grasp concepts by revealing the inner workings of any mechanical or electro-mechanical part on the vehicle. Automotive and Diesel Cutaways are an invaluable tool for the classroom.

PRODUCT FEATURES

CURRICULUM INCLUDED

All ConsuLab products are complete with all learning materials for successful implementation in the classroom and/or lab. All training aids are complete with Student Manuals, Instructor Manual, a User Guide.

Ask your TOOLKIT representative if the ConsuLab training system you are interested in includes ELECTUDE eLearning.

Certification Driven

All ConsuLab Training Systems are aligned with national and international certification standards such as the ASE Education Foundation (Automotive Service Excellence), NATEF, etc.

All training products are organized according to ASE series exams (A1 Engine Repair, A2 Automatic Transmission/Transaxle, etc).

Support

What separates our Automotive and Diesel Training Systems from others? Support, Training, and Quality.

Our team of experts is here for you. From additional training on concepts, to training on our systems, to helping design your curriculum, we're here for you.

Our systems are also built like no other. OEM parts, all welded construction, made to last.